Free runner disassembly guide

[Dr. H. Nikolaus Schaller]

Hi,
you can remove the LDC module (LCD + Touch) by removing the silver  
tape and opening the Hirose FPCB plug.

But I have no idea how to open the combined LCD+Touch-Module. Most  
likely you will destroy it.

Maybe this helps:

http://wiki.openmoko.org/wiki/TPO_TD028TTEC1

Nikolazs


Am 07.11.2009 um 21:36 schrieb RANJAN:

> >I don't think anyone ever tried. If you do, please share the results.
>
> Hi,
>
> Was able to remove the LCD from the metal sandwich kind casing.But  
> there are two cords (highly delicate and flexible) which run from  
> the LCD to the mother board.One is shielded with some sort or metal  
> tape which I did remove and the other is glued.
>
> Please advice.
>
> Sriranjan
>
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20091107/d621161c/attachment.htm