USB networking with Ubuntu 9.04
tonyberth at googlemail.com
Tue Oct 6 21:40:30 CEST 2009
On Tue, Oct 6, 2009 at 10:00 PM, Frederik Sdun <frederik.sdun at googlemail.com
> * Tony Berth <tonyberth at googlemail.com> [06.10.2009 18:06]:
> > followed as described in:
> > http://wiki.openmoko.org/wiki/USB_Networking
> > -------------
> > Ubuntu 9.04 - the Jaunty Jackalope -- udev
> > One can see /etc/udev/rules.d that a device plugged in on USB will be
> > called eth1. Go to system->Administration->Network and add the
> > for eth1 < static ip, address 192.168.0.200 mask 255.255.255.192 add
> > default gateway>. Thats is all.
> > Tested with Qi bootloader aka official MAC address of the Freerunner :
> > Android Koolu beta 7
> > Carig Philippines --frank 14:11, 17 June 2009 (UTC)
> > ----------
> > and eth1 gets assigned the proper IP address. I can connect to Neo but
> > from there I don't have any connection to the 'outside'. Please notice
> > that resolv.conf has the correct Opendns IPs!
> > Actually I should face the same problem as described in:
> > http://lists.openmoko.org/nabble.html#nabble-td3119750
> > but the postings there weren't of any help :(
> > Thanks
> > Tony
> I used the config you can find in  and it works.
> > _______________________________________________
but this one 'ties' it in usb0 although it connects as eth1! How can this
I also used the following entries in /etc/network/interfaces:
iface eth1 inet static
up iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 &
up echo 1 > /proc/sys/net/ipv4/ip_forward &
up iptables -P FORWARD ACCEPT &
down iptables -D POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 &
and didn't work! Openmoko wasn't able to get an IP address at all!
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the community