QtMoko - how do I get WiFi working?

[Torfinn Ingolfsen]

Hi,

On Sun, Sep 13, 2009 at 8:24 AM, Ronald Tallent <ron at tallent.ws> wrote:

> Short answer, yes.
>
> If you haven't already you should probably check out:
> http://wiki.openmoko.org/wiki/Special:Search?search=manually+using
> +wifi&go=Go<http://wiki.openmoko.org/wiki/Special:Search?search=manually+using%0A+wifi&go=Go>
>

Ok, I jave now read that - thanks.
I'm doing
ifconfig eth0 up
wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -i eth0

wpa-supplicant spews this:
root at neo:~# wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -i
eth0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
ioctl[SIOCSIWENCODEEXT]: Operation not supported
CTRL-EVENT-SCAN-RESULTS
WPA: No SSID info found (msg 1 of 4).
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:0f:66:51:aa:41 (SSID='kg4' freq=2417 MHz)
Associated with 00:0f:66:51:aa:41
Authentication with 00:0f:66:51:aa:41 timed out.
ioctl[SIOCSIWMLME]: Operation not supported
Associated with 00:0f:66:51:aa:41
Associated with 00:0f:66:51:aa:41
CTRL-EVENT-SCAN-RESULTS
Trying to associate with 00:0f:66:51:aa:41 (SSID='kg4' freq=2417 MHz)
Associated with 00:0f:66:51:aa:41

and goes on and on

And in another shell:
udhcpc eth0
udhcpc says:
root at neo:/home/root# udhcpc eth0
udhcpc (v0.9.9-pre) started
Sending discover...
Sending discover...
Sending discover...
Lease failed:
Sending discover...
Sending discover...
Sending discover...
Lease failed:

Does anyone have wireless working with WPA encryption on their FreeRunner?
-- 
Regards,
Torfinn Ingolfsen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090913/c65bcc3c/attachment.htm