[QtMoko] How to install tangoGPS?

[Margo]

>
> Can you telnet or nc to localhost port 2947, i.e. either:
>
>  telnet localhost 2947
> or
>  nc localhost 2947
>
> and if this succeeds, type 'r' followed by enter. You should see
> somthing like this:
>
> ~$ telnet localhost 2947
> Trying ::1...
> Trying 127.0.0.1...
> Connected to localhost.
> Escape character is '^]'.
> r
> GPSD,R=1
> $GPRMC,132008.000,A,4340.8841,N,00713.9172,E,3.60,221.79,271109,,,D*6B
> $GPRMC,132009.000,A,4340.8829,N,00713.9156,E,7.42,221.99,271109,,,D*68
> .
> .
> .

It only says:
GPSD,R=1



> If you have internet connection on your QtMoko, you can try the
> following too: in the config put in 88.191.100.245 as IP for the GPSD
> and hit the change button. You should get GPS data for the south of
> France.

Yes, that shows me that i'm in France.