dfu-util doesn't list NAND partitions

Martix martix.cz at gmail.com
Mon Dec 27 14:56:51 CET 2010


Hi,
I had this problem few months ago.
You should flash u-boot to NAND by nandwrite and run "dynpart" and
"dynenv set u-boot_env" in NAND u-boot console.
see: http://wiki.openmoko.org/wiki/Nandwrite
Then you can flash all partitions (including NAND u-boot) via dfu-util
from running NAND u-boot.


2010/12/26 Ivan Matveev <imatveev13 at nm.ru>:
> Hi,
> the issue described at
> http://docs.openmoko.org/trac/ticket/2348
> is still there.
> Tried with 2 versions of dfu-util
>
> dfu-util --intf 0 -l
> dfu-util - (C) 2007 by OpenMoko Inc.
> This program is Free Software and has ABSOLUTELY NO WARRANTY
>
> Found Runtime: [0x1d50:0x5119] devnum=53, cfg=0, intf=2, alt=0,
> name="USB Device Firmware Upgrade"
> ------------
> ./dfu-util --intf 0 -l
> dfu-util - (C) 2005-2008 by Weston Schmidt, Harald Welte and OpenMoko
> Inc. This program is Free Software and has ABSOLUTELY NO WARRANTY
>
> dfu-util does currently only support DFU version 1.0
>
> Found Runtime: [0x1d50:0x5119] devnum=55, cfg=0, intf=2, alt=0,
> name="USB Device Firmware Upgrade"
>
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>



More information about the community mailing list