[ANNOUNCE] qi-bootmenu-0.1 for GTA02

Torfinn Ingolfsen tingox at gmail.com
Sat Feb 13 20:32:15 CET 2010


Hi,

On Sat, Feb 13, 2010 at 2:25 PM, Marc Andre Tanner
<openmoko at brain-dump.org>wrote:

>
> I finally found the time to package up my current state of things which
> works ok here at least for GTA02. Kernel + Qi can be downloaded from:
>

Extremely cool!

So, for flashing, when my NAND looks like this:
 neo:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00200000 00010000 "physmap-flash.0"
mtd1: 00040000 00020000 "qi"
mtd2: 00040000 00020000 "depr-ub-env"
mtd3: 00800000 00020000 "kernel"
mtd4: 000a0000 00020000 "depr"
mtd5: 00040000 00020000 "identity-ext2"
mtd6: 0f6a0000 00020000 "rootfs"

I should flash the bootloader to the partition named "qi" right? Like:
dfu-util -a qi -R -D qi-s3c2442-bootmenu-0.1.udfu
and the kernel like so: dfu-util -a kernel -R -D
uImage-GTA02-bootmenu-0.1.bin
Is this correct?

It would be nice if the various distros out there could place their
> kernels in /boot/uImage-$MACHINE.bin where $MACHINE is either GTA01
> or GTA02. This makes sure that they will be detected by qi-bootmenu.
>

Seems QtMoko is already doing this:
neo:~# ls -l /boot
total 1818
-rw-r--r-- 1 root root 1852364 Oct  2 21:28 uImage-GTA02.bin


You can optionally also place a logo in /boot/bootlogo.png which
> will be displayed along the partition name.
>

Cool. :)
-- 
Regards,
Torfinn Ingolfsen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20100213/b3b7dcb2/attachment-0001.htm 


More information about the community mailing list