Tracking power leackage in my freerunner

[Timo Juhani Lindfors]

rixed at happyleptic.org writes:
> I also did this using qtmoko (setting deep sleep mode in
> /opt/qtmoko/etc/default/Trolltech/Modem.conf), just to be sure.

Deep sleep only matters if the GSM chip is on.

> Should I conclude to a hardware bug ?
> Any idea where/how I should look for ?

My expertise pretty much ends here :-) However, it might help if you
power down all extra hardware (bt, gsm, gps, wifi) and then run gpio
from

http://svn.openmoko.org/trunk/src/target/gpio/ 

and post the results. Here's what I get in this state:

lindi at ginger:~$ om power
bt power 0
gsm power 0
gps power 0
gps keep-on-in-suspend 1
wifi power 0
lindi at ginger:~$ sudo bin/gpio
A  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 
  F0 F0 F0 F0 F0 F0 F0 F0 F0 F0 F0 F0 F0 >0 F0 >0 >0 F0 F0 F0 F0 F0 F0 
B  0  1  2  3  4  5  6  7  8  9 10 
  >0 >0 >0 >0 >0 >0 >0 >0 >0 >1 >0 
C  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 
  >0 >0 >0 >0 >0  0R>0 >0 >0 >0 >0 >0 >0 >1 >0 >1 
D  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 
  >1 >0 >0 >1 >1 >0 >0 >0 >0 >0 >0 >0 >1 >1  1 >0 
E  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 
  F1 F1 F0 F1 F1 >0 F1 F1 F1 F1 F1 F1RF1 F1 F1 F1 
F  0  1  2  3  4  5  6  7 
  F1 F0 F1 F0RF0 F1 F0 F0 
G  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 
  >0 F1 X1 >0 F1  1R>0 >1 F1 F1 F1 F0 >0  1  1  0 
H  0  1  2  3  4  5  6  7  8  9 10 
  F0  0R 0 F0R>0 F1 F1 F1 F0RF1 >0 
J  0  1  2  3  4  5  6  7  8  9 10 11 12 
   0R>1 >0 >0 >1 >1 >1  0R>1 >0 >0 >0 >0

By looking at
https://svn.openmoko.org/trunk/doc/hardware/GTA02v4/gpio.txt you can
see where each GPIO pin is connected to in the schematics

http://people.gta01.hmw-consulting.de/people/joerg/schematics/GTA02/Schematics_Freerunner-GTA02_A5-A7cumulative_public_RC0.pdf

Does your GPIO output differ from mine?