[GTA02] headphone socket issues

[Paul Wise]

On Wed, 2010-03-24 at 03:08 +0300, Paul Fertser wrote:

> Hey, this looks very much like you used an ordinary 2.5<->3.5mm plug
> converter which doesn't work due to wrong pinout. Just use correct
> wiring for the converter (check the wiki), it should work out of the
> box.

I did use a plug converter in this case. Which wiki page can I find the
correct converter wiring information on? I guess I'll need to butcher
the current converter and rewire it?

Earlier I used Nokia headphones with a 2.5mm plug and had the same
one-bud sound issue. At that time I hadn't yet figured out the
workaround of pulling it out a little bit, I'll test that later today.

-- 
bye,
pabs

http://bonedaddy.net/pabs3/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
Url : http://lists.openmoko.org/pipermail/community/attachments/20100324/a4d51b77/attachment.pgp