bluetooth

[beniwtv at relamp.tk]

Quoting Chuck Norris <norris.chuck at mail.ru>:

> 27.04.2010 15:15, beniwtv at relamp.tk пишет:
>> Quoting Chuck Norris <norris.chuck at mail.ru>:
>>
>>> Can someone point me in docs or show configs how to configure bluetooth
>>> network with FreeRunner and my linux box(I have gentoo). I tried read
>>> wiki.bluez.org but without success... :( Is it only possible configure
>>> bluetooth on linux (bluez4) through dbus?
>>
>> That's actually very easy :) Here is what I do:
>>
>> 1) Install emtooth and pair with my computer. Once this is done, the
>> next time I want to use it I just have to open emtooth and let my
>> computer (Linux) connect to the FR.
>>
>> 2) Don't forget to set a name for the bluetooth device (I personally
>> want it to be something else than om-gta-02).
>>
>> 3) Then I fill in /etc/udhcpd.conf with the following information:
>>
>> # The start and end of the IP lease block
>> start 192.168.16.17 #default: 192.168.0.20
>> end 192.168.16.30 #default: 192.168.0.254
>>
>>
>> # The interface that udhcpd will use
>> interface bnep0 #default: eth0
>>
>>
>> # Other options
>> opt dns 208.67.222.222 208.67.220.220
>> option subnet 255.255.255.0
>> opt router 192.168.16.16
>> option domain local
>>
>> 4) And my /etc/network/intrefaces:
>>
>> # Bluetooth networking
>> iface bnep0 inet static
>> address 192.168.16.16
>> netmask 255.255.255.0
>> network 192.168.16.0
>> up udhcpd
>> down killall udhcpd
>>
>> 5) With that configuration, I just need to connect with bluetooth
>> networking and my computer automatically gets an IP address via DHCP.
>> (I have tested this with Linux and Mac OSX).
>>
>> 6) (Optional) If you want, you can also use IPtables to give Internet
>> access to your computer with the GPRS connection of the FR. (Let me
>> know if you need help with this).
>>
>> Regards,
>> Benedikt
>>
>>>
>>> _______________________________________________
>>> Openmoko community mailing list
>>> community at lists.openmoko.org
>>> http://lists.openmoko.org/mailman/listinfo/community
>>>
>>
>>
>>
>>
> how did you get bnep0 ?
>

Last time I checked, you get it automatically when Bluetooth is turned on.