GSM Phone Simulation in Emulator

[Martix]

Hi,

may I ask, why do you try to use this old abandoned stuff?

If you want to develop software for Neo FreeRunner you can use SHR
distribution based on Freesmartphone.org framework (FSO), which also
has phonesim GSM modem simulator [1]. Otherwise there is Qt Moko,
Qtopia based distribution.

[1] http://git.freesmartphone.org/?p=phonesim.git;a=summary

Regards,
Martix

2010/5/8 saravanan T <saravanadel at gmail.com>:
> I have managed to get the phonesim app running, but the simulator always
> shows registering.I am not able to simulate calls on the qemu emulator. 1.I
> cannot simulate the sms or call feature using the phonesim. The phonesim gui
> runs, but it does not shows me the at commands sent by the emulator. 2.How
> can I simulate calls and at commands using the qemu emulator. 3. I have
> tried things like a.connecting using libgsmd-tool b."lsof | /dev/ttySAC0" to
> check whether the device works. but it does not show the ttySAC0 c.cu -l
> /dev/ttySAC0 to the device.But it just says connected. d.powering on and off
> the gsm modem using echo "0" >
>>/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on. no use(the modem does
> not power up,checked using lsof|grep /dev/ttySAC0). The Images I use -
> kernel_wildcard="uImage-2.6.24+git20080424-r0-om-gta01.bin"
> rootfs_wildcard="Openmoko-scaredycat-openmoko-devel-image-glibc-ipk-P1-Snapshot-20080710-om-gta01.rootfs.jffs2"
> uboot_wildcard="u-boot-gta01bv3-1.3.1+svnr4297+gitb29661fc1151077776454288051bc9a488351ce8-r3.bin"
> I use pppd connection to terminal into emulator.
> Regards
> Saravanan.L
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
>