qmoko v28 with jitterless kernel

[giacomo mariani]

> Hi,
> i have rebuilt kernel for qtmoko v28 with patch that
> eliminates touchscreen 
> jitter from Gennady. You can download from uImage-v28.1.bin
> from here [1].
> 
> If you run from NAND you can reflash, if you run from uSD
> you can replace old 
> one in /boot.
> 
> Please note that i have changed the version only in file,
> so that you can use 
> modules from old kernel.
> 
> Regards
> 
> Radek
> 
> [1] http://sourceforge.net/projects/qtmoko/files/Experimental/
>
Thank you very much,
   QtMoko v28 installed in NAND boots with uboot in a very short time and works flawles: it is wonderful! 

But, yes there is a but, I can't ssh to the mobile. 
Looking, in qterminal, at the output of ifconfig everything looks as usual, but demsg givs some strange error when the USB cable is attached:
g_ether gadget: full speed config #2: RNDIS
is followed by a groing (maybe one per second) list of 
s3c24xx-ts s2c2440-ts: stylus_irq: count=1

Anyway it is a great distribution,
thanks again
   Giacomo