MicroSD cards support questions in gta02

[Ed Kapitein]

Hi Alexandros,

Good to hear that!
Please try some other values for the clock settings in
/boot/append-GTA02, and some smaller values for the slow_ratio setting.
i think the system will be slow now, adjusting these values might make
your freerunner faster.
(or instable ;-) )

Kind Regards,
Ed

On 02/27/2011 02:27 PM, Πρεκατές Αλέξανδρος wrote:
> Qi booted qtmoko from my sdcard in gta02 successfully .
> Thank you for the detailed instructions.
>
> Alexandros
>
>
> Στις Κυριακή 27 Φεβρουάριος 2011 00:23:11 Ed Kapitein γράψατε:
>
>> Hi Alexandros,
>>
>> Well, it seems good, the freerunner regonizes the card and loads the
>> kernel. The kernel panic is as expected, there is just a kernel on the
>> card and no distro yet. Could you try  to install the root files system
>> from [2] ?
>> After you installed it make sure to install the kernel in /boot as
>> uImage-GTA02.bin and add the /boot/append-GTA02.
>> (you could make a tar file before installing the rootfs)
>>
>> in cut and paste style:
>> mkdir /tmp/mpt
>> mount /dev/sde1 /tmp/mpt
>> cd /tmp/mpt
>> tar -czf /tmp/old_boot.tgz ./boot
>> tar -xzvpf /the/downloaded/qtmoko-debian-v31.tar.gz
>> tar -xzvpf /tmp/old_boot.tgz
>> cd /
>> umount /tmp/mpt
>> eject /dev/sde
>>
>> put the card in the freerunner and boot using qi
>> That should give you a working distro.
>> Please let us know any success/failure!
>>
>> Kind regards,
>> Ed
>>
>> [2]
>> http://sourceforge.net/projects/qtmoko/files/qtmoko-debian-v31.tar.gz/down
>> load
>