qi: use "\r\n" in serial console?

[Fox Mulder]

Am 23.06.2011 14:15, schrieb Timo Juhani Lindfors:
> Hi,
> 
> if I use "picocom -b 115200 /dev/ttyUSB0" to see the boot messages of Qi
> and kernel I see that the Qi lines are terminated with "\n" while Linux
> uses "\r\n" [1].
I don't know picocom but Linux normally uses \n while windows uses \r\n.
So if qi only use \n it is corrrect for linux.

Ciao,
     Rainer