[qtmoko33] wifi wpa2-psk issue (was: qtmoko v33)

Radek Polak psonek2 at seznam.cz
Wed Mar 16 13:17:56 CET 2011


On Tuesday 08 March 2011 22:29:22 Alfa21 wrote:

> 2011-03-05 at 17:14 Alfa21
> 
> > 2011-03-05 at 12:42 Radek Polak
> > 
> > > > * unable to connect wifi wpa2-psk
> > > 
> > > Was is working in some older versions? It can be bug either in
> > > wpa_supplicatant or in qmoko wifi plugin that creates configuration for
> > > wpa_supplicant. Does it work when you setup wpa_supplicant from command
> > > line? I am trying to connect WPA2-psk here and it does not work too :(
> > 
> > previously I had v31 and it was ok, but only on the first attempt and
> > then I needed to reboot (rebooted also because wifi didn't stop and
> > battery drain empty in few hours) the blue led in v31 did never turn on
> > while connected.
> > before v31 it was all ok... IIRC
> 
> hi,
> I tried to manually configure the wifi link:
> as you can read below, seems to be something different with the wpa driver
> in v33...

Hmm i just tested wpa2-psk here at work and it works (only the first connect 
after reboot). But it can be of course different AP. You could try to enable 
Networking category in Settings->Logging and send me full log. Or you could 
try to replace wpa_supplicant with package from lenny. But I am not wifi expert 
so cant promise anything.

Regards

Radek



More information about the community mailing list