QtMoko v33 - More battery info and questions

Paul Fertser fercerpav at gmail.com
Wed Mar 30 10:31:24 CEST 2011


On Tue, Mar 29, 2011 at 06:00:22PM +1100, Philip Rhoades wrote:
>> Philip Rhoades<phil at pricom.com.au>  writes:
>>> - Even with the "dumb" battery configuration, the battery charging
>>> animated icon continues after USB (power) disconnection - should that
>>> happen?
>> Provide "uevent" files contents for both the battery driver and
>> pcf50633-mbc drivers.
> /sys/devices/platform/s3c2440-i2c/i2c-0/0-0073/pcf50633-mbc.0/power_supply/usb/uevent

With USB unplugged this looks like a manifistation of a bug. Please specify the
kernel version you use.

>>> - The discharge rate attached for an inactive phone (with a blanked
>>> screen) with a new, fully charged battery is not very good (~10
>>> hours)
>> Keep in mind that the SoC was constantly running during that test, so
>> this should be ok. Normal usage assumes you use suspend-to-ram when
>> you do not actually interact with the device, that should give ~70
>> (without #1024 fix) or ~140 (with it) hours of "standby time".
> At the moment dim is set to 20s, display off to 50s and suspend is off -  
> are you saying that suspend should be set to 120s or something?  How  
> does that affect incoming calls?

Incoming calls should wake up the device without any issues, there's a
dedicated irq line for that.

Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercerpav at gmail.com

More information about the community mailing list