question about installing android on FR
Jose Luis Perez Diez
jluis at escomposlinux.org
Fri Jan 20 09:03:05 CET 2012
El Thursday 19 January 2012 17:52:46 a dehqan va escriure:
> Thanks methink so
> Have installed uboot on NAND and have set enviroments on it , this is
> mtdparts output http://pastebin.com/E08fHr2G and this is printenv output
> http://pastebin.com/E08fHr2G
>
> But dfu-util -l http://pastebin.com/59fLK4GC does not show any userdata
> partition while it got system partition
Have you tried to use diferent mtdparts while flashing?
one like this for system:
setenv mtdparts mtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system)
and other like this for usedata:
setenv mtdpartsmtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x04040000(factory_system),0x0b6a0000(userdata)
and, if using uboot to start android, this other when all is flasshed:
setenv mtdparts mtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata)
More information about the community
mailing list