edodd at billiau.net
Tue Jan 31 09:57:47 CET 2012
On Tue, 31 Jan 2012 09:43:37 +0100
Radek Polak <psonek2 at seznam.cz> wrote:
> On Tuesday 31 January 2012 08:45:11 Liz wrote:
> > Sadly, I don't have Power and Aux buttons confused.
> > I don't have access to NAND from the Power button.
> > Both boot methods start the NOR bootloader.
> > I have loaded those three files into those places and the phone
> > doesn't boot, it says there is a checksum error. I checked the
> > md5sum with sourceforge, and it matches.
> Oki, so first you need bootloader. Can you please give exact steps
> (copy paste commands from terminal) how are you doing it and what is
> the outcome? Something like:
> $ wget
> http://sourceforge.net/projects/qtmoko/files/qi-v35.udfu/download -O
> qi- v35.udfu
> Resolving sourceforge.net... 22.214.171.124
> Connecting to sourceforge.net|126.96.36.199|:80... connected.
> HTTP request sent, awaiting response... 302 Found
> 2012-01-31 09:41:36 (190 KB/s) - `qi-v35.udfu' saved [29088/29088]
> $ md5sum qi-v35.udfu
> fe258f3493b7aed65d61c74bdce26cc3 qi-v35.udfu
> $ dfu-util -a u-boot -R -D qi-v35.udfu
> dfu-util - (C) 2007-2008 by OpenMoko Inc.
> This program is Free Software and has ABSOLUTELY NO WARRANTY
> Opening USB Device 0x0000:0x0000...
> Claiming USB DFU Runtime Interface...
> Determining device status: state = appIDLE, status = 0
> Device really in Runtime Mode, send DFU detach request...
> Resetting USB...
downloaded bootloader from sourceforge
whose md5sum is
same result on the terminal : the dfu-utils says the bootloader is
the freerunner says the bootloader installed but it doesn't actually
result in a NAND that I can access
I have two freerunners on my desk, one has v35 on it from those
downloads and exact same commands.
I don't think persevering with the dfu-utils is going to have any
success with the second phone.
Does anyone have any ideas about a failed NAND or ideas about updating
a debian SD card which is FAT+ext2 and can be booted from NOR to qtmoko
More information about the community