problems with qtmoko continuously re-starting
Neil Jerram
neil at ossau.homelinux.net
Sun Jun 10 16:23:20 CEST 2012
Radek Polak <psonek2 at seznam.cz> writes:
> On Thursday, May 17, 2012 12:55:13 AM Robin Paulson wrote:
>
>> it printed this, i'm not sure what it means:
>> QDBusObjectPath: invalid path ""
>> Method call "/->DefaultAdapter()" failed:
>> QDBusError("org.bluez.Error.NoSuchAdapter", "No such adapter")
I'm also seeing this problem now, and (unlike Robin) I don't think I've
physically done anything to my bluetooth chip. So possibly this is a
software problem after all.
> If you need bluetooth we have to figure out what is wrong with it. You
> can try dmesg and hciconfig to find what if blueooth adapter is up and
> working (e.g. is hcitool scan works).
dmesg:
--------->8----------
[ 0.000000] Linux version 3.2.14-gta04+ (root at qtmoko-buildhost) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 PREEMPT Tue Apr 10 16:42:22 UTC 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: GTA04
[ 0.000000] Ignoring tag cmdline (using the default kernel command line)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 128000
[ 0.000000] free_area_init_node: node 0, pgdat c0726b74, node_mem_map c0948000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 126976
[ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=800 vram=12M omapfb.rotate_type=0 omapdss.def_disp=lcd root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait twl4030_charger.allow_usb=1 musb_hdrc.preserve_vbus=1 log_buf_len=8M ignore_loglevel
[ 0.000000] log_buf_len: 8388608
[ 0.000000] early log buf free: 2095643(99%)
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 500MB = 500MB total
[ 0.000000] Memory: 489772k/489772k available, 34516k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0625218 (6261 kB)
[ 0.000000] .init : 0xc0626000 - 0xc06b0000 ( 552 kB)
[ 0.000000] .data : 0xc06b0000 - 0xc07273a0 ( 477 kB)
[ 0.000000] .bss : 0xc07273c4 - 0xc09479f0 (2178 kB)
[ 0.000000] NR_IRQS:410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000183] Calibrating delay loop... 475.76 BogoMIPS (lpj=1855488)
[ 0.074401] pid_max: default: 32768 minimum: 301
[ 0.074554] Mount-cache hash table entries: 512
[ 0.074951] CPU: Testing write buffer coherency: ok
[ 0.075958] devtmpfs: initialized
[ 0.077484] omap_hwmod: usbtll_fck: missing clockdomain for usbtll_fck.
[ 0.079406] print_constraints: dummy:
[ 0.079650] NET: Registered protocol family 16
[ 0.079803] GPMC revision 5.0
[ 0.081237] OMAP GPIO hardware version 2.5
[ 0.082489] running gta04_init()
[ 0.082489] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.083496] Running gta04_init_rev()
[ 0.083801] gta04_rev 3
[ 0.085815] Reprogramming SDRC clock to 332000000 Hz
[ 0.088745] Revision GTA04A3
[ 0.090393] Found NAND on CS0
[ 0.090393] Registering NAND on CS0
[ 0.090637] gta04_init done...
[ 0.090698] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.095214] Calibrating delay loop (skipped) already calibrated this CPU
[ 0.095336] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/800 MHz
[ 0.095489] OMAP DMA hardware revision 5.0
[ 0.100280] bio: create slab <bio-0> at 0
[ 0.101257] SCSI subsystem initialized
[ 0.102142] usbcore: registered new interface driver usbfs
[ 0.102233] usbcore: registered new interface driver hub
[ 0.102386] usbcore: registered new device driver usb
[ 0.102905] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[ 0.107635] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.107727] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.108154] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.108825] machine_constraints_voltage: VUSB1V5: override min_uV, 1 -> 1500000
[ 0.108825] machine_constraints_voltage: VUSB1V5: override max_uV, 2147483647 -> 1500000
[ 0.108856] print_constraints: VUSB1V5: 1500 mV normal standby
[ 0.109191] machine_constraints_voltage: VUSB1V8: override min_uV, 1 -> 1800000
[ 0.109191] machine_constraints_voltage: VUSB1V8: override max_uV, 2147483647 -> 1800000
[ 0.109222] print_constraints: VUSB1V8: 1800 mV normal standby
[ 0.109527] machine_constraints_voltage: VUSB3V1: override min_uV, 1 -> 3100000
[ 0.109527] machine_constraints_voltage: VUSB3V1: override max_uV, 2147483647 -> 3100000
[ 0.109527] print_constraints: VUSB3V1: 3100 mV normal standby
[ 0.110931] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.111419] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.111755] print_constraints: VDAC: 1800 mV normal standby
[ 0.112060] print_constraints: VAUX2: 2800 mV normal standby
[ 0.112365] print_constraints: VDVI: 1800 mV normal standby
[ 0.112670] print_constraints: VSIM: 2800 mV normal standby
[ 0.113006] print_constraints: VAUX1: 2500 <--> 3000 mV at 3000 mV normal standby
[ 0.113281] print_constraints: VAUX3: 2500 mV normal standby
[ 0.113647] print_constraints: VAUX4: 2800 <--> 3150 mV at 2800 mV normal standby
[ 0.114013] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
[ 0.123962] omap_i2c omap_i2c.3: bus 3 rev1.4.0 at 100 kHz
[ 0.124420] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.125061] Switching to clocksource 32k_counter
[ 0.133605] usbhs_omap usbhs_omap: xclk60mhsp2_ck set parentfailed error:-22
[ 0.134033] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.138336] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 0.138366] musb-hdrc: MHDRC RTL version 1.800
[ 0.138366] musb-hdrc: setup fifo_mode 4
[ 0.138397] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 0.138671] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using PIO, IRQ 92
[ 0.138977] NET: Registered protocol family 2
[ 0.139160] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.139434] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.139709] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.139862] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.139892] TCP reno registered
[ 0.139892] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.139923] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.140106] NET: Registered protocol family 1
[ 0.157165] VFS: Disk quotas dquot_6.5.2
[ 0.157226] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.157684] msgmni has been set to 956
[ 0.158843] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.158843] io scheduler noop registered
[ 0.158874] io scheduler deadline registered
[ 0.158905] io scheduler cfq registered (default)
[ 0.160003] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.160980] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 0.161224] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 0.161407] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 0.889953] console [ttyO2] enabled
[ 0.893829] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[ 0.907196] brd: module loaded
[ 0.913299] loop: module loaded
[ 0.918914] omap2-nand driver initializing
[ 0.923980] usbcore: registered new interface driver catc
[ 0.929595] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
[ 0.935852] usbcore: registered new interface driver kaweth
[ 0.941650] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
[ 0.949493] usbcore: registered new interface driver pegasus
[ 0.955383] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 0.962585] usbcore: registered new interface driver rtl8150
[ 0.968536] usbcore: registered new interface driver asix
[ 0.974304] usbcore: registered new interface driver cdc_ether
[ 0.980438] usbcore: registered new interface driver cdc_eem
[ 0.986389] usbcore: registered new interface driver dm9601
[ 0.992248] usbcore: registered new interface driver smsc95xx
[ 0.998260] usbcore: registered new interface driver gl620a
[ 1.004119] usbcore: registered new interface driver net1080
[ 1.010040] usbcore: registered new interface driver plusb
[ 1.015808] usbcore: registered new interface driver rndis_host
[ 1.022003] usbcore: registered new interface driver cdc_subset
[ 1.028228] usbcore: registered new interface driver zaurus
[ 1.034057] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 1.041809] cdc_ncm: 04-Aug-2011
[ 1.045196] usbcore: registered new interface driver cdc_ncm
[ 1.051330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.062591] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.068756] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.076568] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 2.093933] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.100006] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.107086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.114593] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.120147] usb usb1: Manufacturer: Linux 3.2.14-gta04+ ehci_hcd
[ 2.126373] usb usb1: SerialNumber: ehci-omap.0
[ 2.131591] hub 1-0:1.0: USB hub found
[ 2.135559] hub 1-0:1.0: 3 ports detected
[ 2.164337] Initializing USB Mass Storage driver...
[ 2.169525] usbcore: registered new interface driver usb-storage
[ 2.175781] USB Mass Storage support registered.
[ 2.180877] mousedev: PS/2 mouse device common for all mice
[ 2.187072] tsc2007_init()
[ 2.190368] input: TSC2007 Touchscreen as /devices/virtual/input/input0
[ 2.213684] input: bma150 as /devices/platform/omap/omap_i2c.2/i2c-2/2-0041/input/input1
[ 2.223510] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input2
[ 2.235473] twl_rtc twl_rtc: Power up reset detected.
[ 2.241302] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 2.248535] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 2.255889] i2c /dev entries driver
[ 2.260009] Driver for 1-wire Dallas network protocol.
[ 2.265655] APM Battery Driver
[ 2.278167] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 2.284515] cpuidle: using governor ladder
[ 2.288787] cpuidle: using governor menu
[ 2.292968] sdhci: Secure Digital Host Controller Interface driver
[ 2.299438] sdhci: Copyright(c) Pierre Ossman
[ 2.304229] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.310394] Registered led device: gta04:red:aux
[ 2.315277] Registered led device: gta04:green:aux
[ 2.320343] Registered led device: gta04:red:power
[ 2.325439] Registered led device: gta04:green:power
[ 2.330749] machine_constraints_voltage: VWLAN: override min_uV, 2800000 -> 3150000
[ 2.339111] print_constraints: VWLAN: 3150 mV normal standby
[ 2.345092] set_supply: VWLAN: supplied by VAUX4
[ 2.350036] reg-fixed-voltage reg-fixed-voltage.1: vwlan supplying 3150000uV
[ 2.357788] OMAP DSS rev 2.0
[ 2.383972] td028ttec1_panel_probe()
[ 2.387695] jbt_reg_init()
[ 2.444244] did jbt_reg_init()
[ 2.448150] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit)
[ 2.457763] Creating 5 MTD partitions on "omap2-nand.0":
[ 2.463409] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 2.470336] 0x000000000000-0x000000080000 : "X-Loader"
[ 2.476898] 0x000000080000-0x000000260000 : "U-Boot"
[ 2.483306] 0x000000260000-0x000000280000 : "U-Boot Env"
[ 2.489715] 0x000000280000-0x000000680000 : "Kernel"
[ 2.496673] 0x000000680000-0x000020000000 : "File System"
[ 2.627777] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800
[ 2.636077] omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode
[ 2.644348] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[ 2.651824] usb 1-2: Product: Globetrotter HSUPA Modem
[ 2.657196] usb 1-2: Manufacturer: Option N.V.
[ 2.845245] usbcore: registered new interface driver usbhid
[ 2.851043] usbhid: USB HID core driver
[ 2.856140] usbcore: registered new interface driver snd-usb-audio
[ 2.867523] GTA04 OMAP3 SoC snd init
[ 2.925964] bq27000-battery bq27000-battery: support ver. 1.2.0 enabled
[ 2.950897] TPS Voice IF set to tristate
[ 2.957763] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[ 2.964904] gta04-voice SoC init
[ 2.969238] asoc: GTM601 <-> omap-mcbsp-dai.3 mapping ok
[ 2.975494] gta04-headset SoC init
[ 2.979980] asoc: W2CBW003 <-> omap-mcbsp-dai.2 mapping ok
[ 2.986419] ALSA device list:
[ 2.989501] #0: gta04
[ 2.992065] #1: gta04-voice
[ 2.995178] #2: gta04-headset
[ 2.998443] oprofile: hardware counters not available
[ 3.003753] oprofile: using timer interrupt.
[ 3.008392] TCP cubic registered
[ 3.011749] NET: Registered protocol family 17
[ 3.016479] NET: Registered protocol family 15
[ 3.021087] lib80211: common routines for IEEE802.11 drivers
[ 3.027008] lib80211_crypt: registered algorithm 'NULL'
[ 3.033142] rfkill-regulator rfkill-regulator.0: GPS initialized
[ 3.041015] rfkill-regulator rfkill-regulator.1: Bluetooth initialized
[ 3.048309] Registering the dns_resolver key type
[ 3.053253] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.061279] ThumbEE CPU extension supported.
[ 3.067474] omap2_set_init_voltage: unable to find boot up OPP for vdd_mpu_iva
[ 3.075042] omap2_set_init_voltage: unable to set vdd_mpu_iva
[ 3.082489] sr_init: No PMIC hook to init smartreflex
[ 3.087982] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[ 3.096221] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[ 3.104431] SmartReflex Class3 initialized
[ 3.108764] clock: disabling unused clocks to save power
[ 3.114929] registered taskstats version 1
[ 3.133941] Console: switching to colour frame buffer device 60x40
[ 3.145568] td028ttec1_panel_enable()
[ 3.149414] gta04_enable_lcd()
[ 3.165863] td028ttec1_panel_resume()
[ 3.375335] omapdss DPI: Could not find exact pixel clock. Requested 22000 kHz, got 22153 kHz
[ 3.385406] gta04_enable_lcd()
[ 3.389099] regulator_init_complete: VAUX3: disabling
[ 3.395782] regulator_init_complete: VAUX2: disabling
[ 3.402038] regulator_init_complete: VDAC: disabling
[ 3.408233] regulator_init_complete: VMMC1: disabling
[ 3.414764] input: gpio-keys as /devices/platform/gpio-keys/input/input3
[ 3.423950] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ 3.436584] Freeing init memory: 552K
[ 3.822448] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.831146] mmc0: new SD card at address aaaa
[ 3.836181] mmcblk0: mmc0:aaaa SU02G 1.84 GiB
[ 3.843322] mmcblk0: p1 p2 p3 p4
[ 3.938293] mmc1: new SDIO card at address 0001
[ 26.146820] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 27.591735] udev[101]: starting version 164
[ 28.330413] cfg80211: Calling CRDA to update world regulatory domain
[ 28.556945] hso: drivers/net/usb/hso.c: Option Wireless
[ 28.689086] libertas_sdio: Libertas SDIO driver
[ 28.693786] libertas_sdio: Copyright Pierre Ossman
[ 28.821136] usbcore: registered new interface driver hso
[ 31.523895] libertas_sdio mmc1:0001:1: (unregistered net_device): 00:19:88:3d:ff:ea, fw 9.70.7p0, cap 0x00000303
[ 31.625518] libertas_sdio mmc1:0001:1: (unregistered net_device): PREP_CMD: command 0x00a3 failed: 2
[ 31.680969] libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11 adapter
[ 33.913085] Adding 286100k swap on /dev/mmcblk0p4. Priority:-1 extents:1 across:286100k SS
[ 36.421142] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 36.765686] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 37.012145] usb0: MAC b6:c8:ab:ac:44:7f
[ 37.016815] usb0: HOST MAC 46:0d:9e:67:69:eb
[ 37.027191] gadget: Ethernet Gadget, version: Memorial Day 2008
[ 37.039306] gadget: g_ether ready
[ 37.042846] musb-hdrc musb-hdrc: MUSB HDRC host driver
[ 37.065002] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 2
[ 37.078430] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 37.085510] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 37.116149] usb usb2: Product: MUSB HDRC host driver
[ 37.126312] usb usb2: Manufacturer: Linux 3.2.14-gta04+ musb-hcd
[ 37.132568] usb usb2: SerialNumber: musb-hdrc
[ 37.143066] hub 2-0:1.0: USB hub found
[ 37.147003] hub 2-0:1.0: 1 port detected
[ 38.507476] NET: Registered protocol family 10
[ 38.513854] ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 39.777679] sshd (998): /proc/998/oom_adj is deprecated, please use /proc/998/oom_score_adj instead.
[ 40.222961] Bluetooth: Core ver 2.16
[ 40.228179] NET: Registered protocol family 31
[ 40.232788] Bluetooth: HCI device and connection manager initialized
[ 40.239715] Bluetooth: HCI socket layer initialized
[ 40.244903] Bluetooth: L2CAP socket layer initialized
[ 40.250274] Bluetooth: SCO socket layer initialized
[ 42.324584] Bluetooth: HCI UART driver ver 2.2
[ 42.329467] Bluetooth: HCI H4 protocol initialized
[ 42.336059] Bluetooth: HCI BCSP protocol initialized
[ 42.341491] Bluetooth: HCILL protocol initialized
[ 42.944244] Bluetooth: RFCOMM TTY layer initialized
[ 42.949615] Bluetooth: RFCOMM socket layer initialized
[ 42.954986] Bluetooth: RFCOMM ver 1.11
[ 47.181671] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 47.187225] Bluetooth: BNEP filters: protocol multicast
[ 62.050750] i2c i2c-2: new_device: Instantiated device bmp085 at 0x77
[ 62.075866] bmp085 2-0077: BMP085 ver. 1.0 found.
[ 62.086212] bmp085 2-0077: Successfully initialized bmp085!
[ 75.943115] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[ 84.818939] gadget: high-speed config #1: CDC Ethernet (ECM)
[ 84.825927] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[ 95.707122] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[ 95.812652] usb0: no IPv6 routers present
[ 115.061218] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[ 134.169494] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[ 150.929351] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[ 167.122558] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[ 186.316558] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[ 200.983581] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
[ 218.814331] i2c i2c-2: Failed to register i2c client bmp085 at 0x77 (-16)
--------->8----------
hciconfig:
--------->8----------
root at neo:~# hciconfig
hci0: Type: BR/EDR Bus: UART
BD Address: 00:19:88:19:DD:23 ACL MTU: 310:10 SCO MTU: 64:8
DOWN
RX bytes:470 acl:0 sco:0 events:16 errors:0
TX bytes:86 acl:0 sco:0 commands:16 errors:0
--------->8----------
hcitool scan:
--------->8----------
root at neo:~# hcitool scan
Device is not available: No such device
--------->8----------
rfkill state:
--------->8----------
root at neo:~# rfkill list
0: GPS: GPS
Soft blocked: no
Hard blocked: no
1: Bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
2: hso-5: Wireless WAN
Soft blocked: no
Hard blocked: no
3: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
4: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
--------->8----------
I'm a newbie with Bluetooth, so please advise what further tests and
information would help to debug this.
Regards,
Neil
More information about the community
mailing list