GTA02, FSO in debian/sid: buttons do not work, led neither

Rico Rommel rico at bierrommel.de
Sun Mar 25 20:50:53 CEST 2012


Hi Arne,

please try this config

aux should suspend device and LEDs light when charging with adapter

Rico
-------------- next part --------------
[frameworkd]
# indicates this configuration version, do not change
version = 1
# the default log_level, if not specified per subsystem or module
# available log levels are: DEBUG, INFO, WARNING, ERROR, CRITICAL
log_level = ERROR
# the global log_destination. Uncomment to enable
log_to = file
#log_to = file
#log_to = syslog
# if logging to a file, specify the destination
log_destination = /var/log/frameworkd.log
# persistance format, one of "pickle", "yaml"
persist_format = pickle
rootdir = ../etc/freesmartphone:/etc/freesmartphone:/usr/etc/freesmartphone

[odeviced]
# set 1 to disable a module
disable = 1

[odeviced.kernel26]
# set 1 to disable a module
disable = 1
# poll capacity once every 5 minutes
# (usually, you do not have to change this)
capacity_check_timeout = 300
# set 0 to disable FB_BLANK ioctl to blank framebuffer
# (if you have problems on Openmoko GTA02)
fb_blank = 1

[odeviced.audio]
# set 1 to disable a module
disable = 1
# set directory where the alsa audio scenarios are stored
scenario_dir = /usr/share/openmoko/scenarios
# set default scenario loaded at startup
default_scenario = stereoout

[odeviced.idlenotifier]
# set 1 to disable a module
disable = 1
# don't read from accellerometers for GTA02
ignoreinput = 2,3
# configure timeouts (in seconds) here. A value of 0
# means 'never fall into this state' (except programatically)
idle = 10
idle_dim = 20
idle_prelock = 12
lock = 2
suspend = 0

[odeviced.input]
# set 1 to disable a module
disable = 1
# don't read from accellerometers for GTA02
ignoreinput = 2,3
# format is <keyname>,<type>,<input device keycode>,<report held seconds in addition to press/release>
report1 = AUX,key,169,1
report2 = POWER,key,116,1
report3 = USB,key,356,0
report4 = HEADSET,switch,2,0

[odeviced.powercontrol-neo]
# set 1 to disable a module
disable = 1

# disable accelerometer since it uses LOADS of CPU resources
[odeviced.accelerometer]
disable = 1
accelerometer_type = gta02

[ogsmd]
# set log_level to INFO for ogsmd to avoid a bug
log_level = INFO
# set 1 to disable a module
disable = 1
# choose your modem type, available types are: ti_calypso, freescale_neptune, singleline, muxed4line, option, ...
modemtype = ti_calypso
# if you have a ti_calypso, you can choose the deep sleep mode. Valid values are: never, adaptive (default), always
ti_calypso_deep_sleep = adaptive
# if you have a ti_calypso, you can choose the dsp mode for audio enhancement. Valid values are:
#    "short-aec": Short Echo Cancellation (max)
#    "long-aec":  Long Echo Cancellation (max)
#    "long-aec:6db": Long Echo Cancellation (-6db)
#    "long-aec:12db": Long Echo Cancellation (-12db)
#    "long-aec:18db": Long Echo Cancellation (-18db)
#    "nr": Noise Reduction (max)
#    "nr:6db": Noise Reduction (-6db)
#    "nr:12db": Noise Reduction (-12db)
#    "nr:18db": Noise Reduction (-18db)
#    "aec+nr": Long Echo Cancellation (max) plus Noise Reduction (max) [default]
#    "none": No audio processing.
ti_calypso_dsp_mode = aec+nr
# choose your muxer, available types are: gsm0710muxd [default], fso-abyss
#ti_calypso_muxer = fso-abyss

[ogpsd]
# set 1 to disable a module
disable = 1
# possible options are NMEADevice, UBXDevice, GTA02Device, EtenDevice
device = GTA02Device
# possible options are SerialChannel, GllinChannel, UDPChannel, FileChannel
channel = SerialChannel
# For UDPChannel the path defines the port to listen to
path = /dev/ttySAC1

[ousaged]
# set 1 to disable a module
# you need to disable ousaged if you want to use the new implementation: fso-usaged
disable = 1
# choose whether resources should be disabled at startup, at shutdown, always (default), or never.
sync_resources_with_lifecycle = always

[ousaged.generic]

[opreferencesd]
# set 1 to disable a module
disable = 0
log_level = WARNING

[opreferencesd.opreferences]

[oeventsd]
# set 1 to disable a module
disable = 0
log_level = WARNING

[oeventsd.oevents]

[onetworkd]
[onetworkd.network]

[ophoned]
disable=1
[ophoned.ophoned]

[opimd]
# set 1 to disable a module
disable = 0
#contacts_default_backend = CSV-Contacts
#messages_default_backend = SQlite-Messages
#calls_default_backend = SQLite-Calls
#dates_default_backend = SQLite-Dates
#notes_default_backend = SQLite-Notes
#tasks_default_backend = SQLite-Tasks
#contacts_merging_enabled = 1
#messages_default_folder = Unfiled
#messages_trash_folder = Trash
#sim_messages_default_folder = SMS
rootdir = ../etc/freesmartphone/opim:/etc/freesmartphone/opim:/usr/etc/freesmartphone/opim

[opimd.opimd]

[otimed]
disable = 1
# a list of time/zone sources to use or NONE
timesources = GPS,NTP
zonesources = GSM
# use an ip address here, otherwise DNS resolution will block
ntpserver = 134.169.172.1

[otimed.otimed]
-------------- next part --------------
A non-text attachment was scrubbed...
Name: rules.yaml
Type: application/x-yaml
Size: 2912 bytes
Desc: not available
URL: <http://lists.openmoko.org/pipermail/community/attachments/20120325/e15965a8/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fsodatad.conf
Type: text/x-matlab
Size: 696 bytes
Desc: not available
URL: <http://lists.openmoko.org/pipermail/community/attachments/20120325/e15965a8/attachment-0001.bin>
-------------- next part --------------

[logging]
log_level=ERROR
log_to=file
log_destination=/var/log/fsodeviced.log

[fsodevice]

[fsodevice.accelerometer_lis302]
inputnode = /input/event4
sysfsnode = /bus/spi/devices/spi3.0/
duration = 200
sample_rate = 100
threshold = 54
full_scale = 2.3

[fsodevice.accelerometer]
device_type=lis302

[fsodevice.kernel26_display]

[fsodevice.kernel26_leds]
ignore_by_name=vib

[fsodevice.kernel26_powersupply]

[fsodevice.kernel26_rfkill]

[fsodevice.kernel26_rtc]

[fsodevice.kernel_info]

[fsodevice.kernel_input]
ignore_by_id=lis302
report1=AUX,key,169,1
report2=POWER,key,116,1
report3=USB,key,356,0
report4=HEADSET,switch,2,0

[fsodevice.kernel_idle]
ignore_by_id=lis302
busy=5
idle=10
idle_dim=20
idle_prelock=20
lock=20
suspend=20

[fsodevice.player_gstreamer]

[fsodevice.router_alsa]

[fsodevice.audio]
player_type=gstreamer
router_type=alsa

[fsodevice.vibrator_ledclass]

[fsodevice.openmoko_powercontrol]
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fsousaged.conf
Type: text/x-matlab
Size: 1278 bytes
Desc: not available
URL: <http://lists.openmoko.org/pipermail/community/attachments/20120325/e15965a8/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fsogsmd.conf
Type: text/x-matlab
Size: 2793 bytes
Desc: not available
URL: <http://lists.openmoko.org/pipermail/community/attachments/20120325/e15965a8/attachment-0003.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fsotdld.conf
Type: text/x-matlab
Size: 1491 bytes
Desc: not available
URL: <http://lists.openmoko.org/pipermail/community/attachments/20120325/e15965a8/attachment-0004.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.openmoko.org/pipermail/community/attachments/20120325/e15965a8/attachment.pgp>


More information about the community mailing list