Qtmoko v52-armhf : Issue to resume

[Adrien Dorsaz]

Hello,

So this evening I had the black screen bug. In this case, dbus daemon is
down too, but I didn't received any SMS.

In fact, I was dist-upgrading with cable plugged and I had some error
with apt-get (I didn't take time to read the log, because navit isn't
very important for me). I don't know if it's wired with these errors.

In the same time, in another ssh connexion, I was trying to run another
version of ics2qtcal application to fix bug reported in this mailing
list. And that's when I wanted to see result on the screen that I've
seen the black screen.

I let you my syslog and my apt-log in attachements.

Hope that help,
Adrien
-------------- next part --------------
cat term.log 

Log started: 2013-02-15  20:21:12
(Reading database ... 32519 files and directories currently installed.)
Preparing to replace libcurl3-gnutls:armhf 7.26.0-1 (using .../libcurl3-gnutls_7.26.0-1+wheezy1_armhf.deb) ...
Unpacking replacement libcurl3-gnutls:armhf ...
Selecting previously unselected package libgfortran3:armhf.
Unpacking libgfortran3:armhf (from .../libgfortran3_4.7.2-5_armhf.deb) ...
Selecting previously unselected package python-support.
Unpacking python-support (from .../python-support_1.0.15_all.deb) ...
Preparing to replace libertas-firmware 9.70.7.p0.0-1 (using .../libertas-firmware_9.70.7.p0.0-2_all.deb) ...
Unpacking replacement libertas-firmware ...
Selecting previously unselected package firmware-libertas.
Unpacking firmware-libertas (from .../firmware-libertas_0.36+wheezy.1_all.deb) ...
Selecting previously unselected package gpsd.
Unpacking gpsd (from .../archives/gpsd_3.6-4_armhf.deb) ...
Selecting previously unselected package python-gps.
Unpacking python-gps (from .../python-gps_3.6-4_armhf.deb) ...
Selecting previously unselected package libblas3.
Unpacking libblas3 (from .../libblas3_1.2.20110419-5_armhf.deb) ...
Selecting previously unselected package libblas3gf.
Unpacking libblas3gf (from .../libblas3gf_1.2.20110419-5_all.deb) ...
Selecting previously unselected package liblapack3.
Unpacking liblapack3 (from .../liblapack3_3.4.1-6_armhf.deb) ...
Selecting previously unselected package liblapack3gf.
Unpacking liblapack3gf (from .../liblapack3gf_3.4.1-6_all.deb) ...
Selecting previously unselected package python-numpy.
Unpacking python-numpy (from .../python-numpy_1%3a1.6.2-1_armhf.deb) ...
Selecting previously unselected package python-cairo.
Unpacking python-cairo (from .../python-cairo_1.8.8-1_armhf.deb) ...
Selecting previously unselected package python-gobject-2.
Unpacking python-gobject-2 (from .../python-gobject-2_2.28.6-10_armhf.deb) ...
Selecting previously unselected package python-gtk2.
Unpacking python-gtk2 (from .../python-gtk2_2.24.0-3+b1_armhf.deb) ...
Selecting previously unselected package gpsd-clients.
Unpacking gpsd-clients (from .../gpsd-clients_3.6-4_armhf.deb) ...
Preparing to replace qtmoko-gta04 52-1 (using .../qtmoko-gta04_53-1_armhf.deb) ...
Unpacking replacement qtmoko-gta04 ...
Preparing to replace qtmoko-navit 37-1 (using .../qtmoko-navit_37-1_armhf.deb) ...
Unpacking replacement qtmoko-navit ...
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
dpkg: warning: subprocess old post-removal script returned error exit status 1
dpkg: trying script from the new package instead ...
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
dpkg: error processing /var/cache/apt/archives/qtmoko-navit_37-1_armhf.deb (--unpack):
 subprocess new post-removal script returned error exit status 1
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
QWSSocket::connectToLocalFile could not connect:: Connection refused
dpkg: error while cleaning up:
 subprocess new post-removal script returned error exit status 1
Processing triggers for man-db ...
Errors were encountered while processing:
 /var/cache/apt/archives/qtmoko-navit_37-1_armhf.deb
Log ended: 2013-02-15  20:25:24

Log started: 2013-02-15  20:30:09
dpkg: error processing qtmoko-navit (--purge):
 Package is in a very bad inconsistent state - you should
 reinstall it before attempting a removal.
Errors were encountered while processing:
 qtmoko-navit
Log ended: 2013-02-15  20:30:17

-------------- next part --------------
Feb 15 17:10:39 neo kernel: [  468.191009] Freezing user space processes ... (elapsed 0.02 seconds) done.
Feb 15 17:10:39 neo kernel: [  468.220184] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
Feb 15 17:10:39 neo kernel: [  468.251403] Suspending console(s) (use no_console_suspend to debug)
Feb 15 17:10:39 neo kernel: [  468.272430] mmc1: card 0001 removed
Feb 15 17:10:39 neo kernel: [  468.406066] PM: suspend of devices complete after 147.308 msecs
Feb 15 17:10:39 neo kernel: [  468.406738] PM: late suspend of devices complete after 0.610 msecs
Feb 15 17:10:39 neo kernel: [  468.414276] GPS SET to 0
Feb 15 17:10:39 neo kernel: [  468.414428] PM: noirq suspend of devices complete after 7.659 msecs
Feb 15 17:10:39 neo kernel: [  468.414703] Successfully put all powerdomains to target state
Feb 15 17:10:39 neo kernel: [  468.438629] GPS SET to 0
Feb 15 17:10:39 neo kernel: [  468.458068] PM: noirq resume of devices complete after 43.029 msecs
Feb 15 17:10:39 neo kernel: [  468.458892] PM: early resume of devices complete after 0.396 msecs
Feb 15 17:10:39 neo kernel: [  468.460479] GPS resuming 0 0
Feb 15 17:10:39 neo kernel: [  468.930328] PM: resume of devices complete after 471.282 msecs
Feb 15 17:10:39 neo kernel: [  468.992126] Unhandled fault: imprecise external abort (0x1c06) at 0xde109fa8
Feb 15 17:10:39 neo kernel: [  468.988250] Restarting tasks ... done.
Feb 15 17:10:39 neo kernel: [  469.007110] td028ttec1_panel_resume()
Feb 15 17:10:39 neo kernel: [  469.313568] gta04_enable_lcd()
Feb 15 17:10:39 neo kernel: [  469.423645] mmc1: new SDIO card at address 0001
Feb 15 17:10:45 neo kernel: [  474.921142] PM: NOT Syncing filesystems ... td028ttec1_panel_suspend()
Feb 15 17:10:45 neo kernel: [  474.969268] gta04_disable_lcd()
Feb 15 17:12:42 neo kernel: [  592.094726] libertas_sdio mmc1:0001:1 (unregistered net_device): 00:19:88:42:95:8c, fw 9.70.7p0, cap 0x00000303
Feb 15 17:12:42 neo kernel: [  592.178466] libertas_sdio mmc1:0001:1 (unregistered net_device): PREP_CMD: command 0x00a3 failed: 2
Feb 15 17:12:42 neo kernel: [  592.189849] libertas_sdio mmc1:0001:1 wlan0: Marvell WLAN 802.11 adapter
Feb 15 20:08:49 neo kernel: [  592.198669] Freezing user space processes ... (elapsed 0.02 seconds) done.
Feb 15 20:08:49 neo kernel: [  592.228149] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
Feb 15 20:08:49 neo kernel: [  592.259399] Suspending console(s) (use no_console_suspend to debug)
Feb 15 20:08:49 neo kernel: [  592.280426] mmc1: card 0001 removed
Feb 15 20:08:49 neo kernel: [  592.476562] PM: suspend of devices complete after 209.838 msecs
Feb 15 20:08:49 neo kernel: [  592.477203] PM: late suspend of devices complete after 0.610 msecs
Feb 15 20:08:49 neo kernel: [  592.484741] GPS SET to 0
Feb 15 20:08:49 neo kernel: [  592.484893] PM: noirq suspend of devices complete after 7.659 msecs
Feb 15 20:08:49 neo kernel: [  592.485137] Successfully put all powerdomains to target state
Feb 15 20:08:49 neo kernel: [  592.509094] GPS SET to 0
Feb 15 20:08:49 neo kernel: [  592.528564] PM: noirq resume of devices complete after 43.029 msecs
Feb 15 20:08:49 neo kernel: [  592.530059] PM: early resume of devices complete after 1.129 msecs
Feb 15 20:08:49 neo kernel: [  592.532592] GPS resuming 0 0
Feb 15 20:08:49 neo kernel: [  592.905456]  gadget: high-speed config #1: CDC Ethernet (ECM)
Feb 15 20:08:49 neo kernel: [  592.931213] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
Feb 15 20:08:49 neo kernel: [  593.039978] PM: resume of devices complete after 509.735 msecs
Feb 15 20:08:49 neo kernel: [  593.110900] Restarting tasks ... done.
Feb 15 20:08:49 neo kernel: [  593.124511] td028ttec1_panel_resume()
Feb 15 20:08:49 neo kernel: [  593.427978] gta04_enable_lcd()
Feb 15 20:08:50 neo kernel: [  593.538208] mmc1: new SDIO card at address 0001
Feb 15 20:08:55 neo kernel: [  599.190551] PM: NOT Syncing filesystems ... td028ttec1_panel_suspend()
Feb 15 20:08:55 neo kernel: [  599.295135] gta04_disable_lcd()
Feb 15 20:10:52 neo kernel: [  716.079345] libertas_sdio mmc1:0001:1 (unregistered net_device): 00:19:88:42:95:8c, fw 9.70.7p0, cap 0x00000303
Feb 15 20:10:52 neo kernel: [  716.163055] libertas_sdio mmc1:0001:1 (unregistered net_device): PREP_CMD: command 0x00a3 failed: 2
Feb 15 20:10:52 neo kernel: [  716.174377] libertas_sdio mmc1:0001:1 wlan0: Marvell WLAN 802.11 adapter
Feb 15 20:10:52 neo kernel: [  716.183197] Freezing user space processes ... 
Feb 15 20:10:52 neo kernel: [  716.188568] last active wakeup source: gpio-keys.0
Feb 15 20:10:52 neo kernel: [  716.193878] 
Feb 15 20:10:52 neo kernel: [  716.195556] Freezing of tasks aborted after 0.00 seconds (27 tasks refusing to freeze, wq_busy=0):
Feb 15 20:10:52 neo kernel: [  716.205047] 
Feb 15 20:10:52 neo kernel: [  716.206604] Restarting tasks ... done.
Feb 15 20:10:52 neo kernel: [  716.211822] td028ttec1_panel_resume()
Feb 15 20:10:52 neo kernel: [  716.504333] gta04_enable_lcd()
Feb 15 20:10:54 neo Qtopia: Rejecting modal dialog: TouchScreenLockDialog
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] main.c: Got signal SIGTERM.
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] main.c: Exiting.
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] main.c: Daemon shutdown initiated.
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-alsa-sink" (index: #4).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] sink.c: Created sink 1 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] sink.c:     device.description = "Dummy Output"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] sink.c:     device.class = "abstract"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] sink.c:     device.icon_name = "audio-card"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] source.c: Created source 1 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] source.c:     device.description = "Monitor of Dummy Output"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] source.c:     device.class = "monitor"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] source.c:     device.icon_name = "audio-input-microphone"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #17; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-alsa-sink" (index: #4).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #5).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #5).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #6).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #6).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #7).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #7).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #8).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #8).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #9).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #9).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #10).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #10).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #11).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #11).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #12).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #12).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #13).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #13).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #14).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #14).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-dbus-protocol" (index: #15).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.hw_0_0"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] source.c: Freeing source 0 "alsa_output.hw_0_0.monitor"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-dbus-protocol" (index: #15).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #16).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #16).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloading "module-null-sink" (index: #17).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] sink.c: Freeing sink 1 "auto_null"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] source.c: Freeing source 1 "auto_null.monitor"
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] module.c: Unloaded "module-null-sink" (index: #17).
Feb 15 20:22:53 neo pulse.sh: I: [pulseaudio] main.c: Daemon terminated.
Feb 15 20:22:53 neo Qtopia: ApplicationLayer:  Application layer server unexpectedly terminated.
Feb 15 20:22:53 neo Qtopia: ApplicationLayer:  Application layer server unexpectedly terminated.
Feb 15 20:22:53 neo Qtopia: Terminated

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.openmoko.org/pipermail/community/attachments/20130215/44ad78a2/attachment-0001.pgp>