TIFFS in vitro analyzer tool released
Giacomo 'giotti' Mariani
giacomomariani at yahoo.it
Tue Feb 4 12:34:51 CET 2014
Hi David, Michael, all,
> Hi
>
>> It looks like you will need to convince the maintainer of Qtmoko to
>> tell you (and the rest of us) how to get his popular distro working
>> with FreeCalypso tools. Or you could try the special distro which
>> David Matthews put together - the 2nd version which works without the
>> special cable.
> Making a general purpose distro such as Qtmoko loadtools capable is likely to be a non starter. As well as stopping everything that's accessing the modem - which will likely be the problem Giacomo reported - it's likely to be advisable to rip out all the audio stuff also.
>
> hehe - So prepare your qtmoko (by ripping it to shreds), run loadtools to flash your calypso, then reinstall and recover your data from backups :-)
It's been easier than expected:
root at neo:~# .
/opt/qtmoko/qpe.env
root at neo:/root# /etc/init.d/qtmoko-neo stop
root at neo:/mnt/nfs/root/ModemFFS/Backup# fc-loadtool -h gta02
/dev/ttySAC0
Sending beacons to
/dev/ttySAC0
Toggling
/sys/bus/platform/devices/gta02-pm-gsm.0/power_on
Got beacon response, attempting
download
<p command successful, switching to 115200
baud
Sending image
payload
............................................................................................................................................................................................................................................................................................................................................................Sending
checksum
<c command successful, sending
<b
<b command successful: downloaded image should now be
running!
FreeCalypso loadagent
running
Loaded via UART 0 (MODEM) at baud rate
#0
TCXO clock input autodetected to be 26
MHz
Executing init script
k5a3281.init
Script command: w16 fffffb00
00A3
Script command: w16 fffffb02 00A3
loadtool> flash dump2bin
my-flashdump.bin
Requesting initial CRC-32 of the area from
target...
got
95D5AB43
Requesting memory
dump...
Rx 4194304 out of 4194304 bytes
(100%)
Requesting another CRC-32 of the area from
target...
match, dump successful
root at neo:/mnt/nfs/root/ModemFFS/Backup# /etc/init.d/qtmoko-neo start
Now I'm looking at it with mokoffs :-)
Thank you very much,
Giacomo
>
> Better idea - use the "special distro" (I used Qtmoko as a starting point) with or without the cable - or else build your own single purpose boot_and_run_from_sdcard system.
>
> http://winterveldt.co.za/leo2moko-p2.html
> --
> David Matthews
> mail at dmatthews.org
> --
> David Matthews
> mail at dmatthews.org
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
--
##############################################################
giacomo 'giotti' mariani
gpg --keyserver pool.sks-keyservers.net --recv-key 0x99bfa859
O< ASCII ribbon campaign: stop HTML mail
www.asciiribbon.org
##############################################################
More information about the community
mailing list