Retrieving contacts for remote backup in QtMoko.

[Ed Kapitein]

On 01/22/2015 09:11 PM, Robert 'Bobby' Zenz wrote:
> Hello.
>
> Thank you. The contacts are on the SIM card, I already tried
> "talking" with it but my tries were a little unsuccessful and resulted
> in the modem/SIM not answering at all and locking up. My assumption was
> that that was because I tried to talk with it at the same time as
> QtMoko and its services.
>
> Do you know what the preferred way is to send commands to the SIM in
> QtMoko? Or should a "normal" serial/terminal communication program be
> enough?
 ><snip><

You should stop qpe, so it is not using the modem anymore.
( /etc/init.d//qpe/.sh /stop/ i believe )
Then you can use a normal terminal program to send commands.
Minicom should work just fine.

If the modem locks up, you can reset it with:
echo 0 > 
/sys/devices/platform/s3c2440-i2c/i2c-0/0-0073/pcf50633-gpio.0/reg-fixed-voltage.1/gta02-pm-gsm.0/power_on
sleep 5
echo 1 > 
/sys/devices/platform/s3c2440-i2c/i2c-0/0-0073/pcf50633-gpio.0/reg-fixed-voltage.1/gta02-pm-gsm.0/power_on

if 
/sys/devices/platform/s3c2440-i2c/i2c-0/0-0073/pcf50633-gpio.0/reg-fixed-voltage.1/gta02-pm-gsm.0/power_on 

does not exists, try
/sys/devices/platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/neo1973-pm-gsm.0/power_on, 
there was a change of path somewhere in the past.

Kind regards,
Ed



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openmoko.org/pipermail/community/attachments/20150122/e795b214/attachment.html>