<div dir="ltr">Hi!<br>Thanks for sharing the information!<br>I managed to get calibration right by copying the xglamo and libts.0* files from 2007.2 image to debian and starting xfce via ssh. It worked then with the standard /etc/pointercal from the 2007.2 image.<br>
But I then had the problem, that gdm didn't recognize the ts anymore at all and only if I started xfce by ssh did it recognize the ts.<br>Mysterious problems, but I am sure that they will be solved soon!<br>good luck,<br>
edistar<br><br><div class="gmail_quote">On Thu, Aug 7, 2008 at 6:20 PM, Gregoire Gentil <span dir="ltr"><<a href="mailto:gregoire@gentil.com">gregoire@gentil.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hello,<br>
<br>
After much efforts (but thanks for the page ;-) ), I have managed to<br>
install this on my microSD card:<br>
<a href="http://wiki.openmoko.org/wiki/Debian" target="_blank">http://wiki.openmoko.org/wiki/Debian</a><br>
<br>
I can reach the gdm screen but the calibration of the touchscreen is<br>
totally flaky.<br>
<br>
After another set of painful efforts, I have managed to install<br>
libts-bin and run ts_calibrate. If you want to know, you need to do this<br>
from the terminal over the USB-connection:<br>
<br>
export TSLIB_CALIBFILE="/etc/pointercal"<br>
export TSLIB_CONFFILE="/etc/ts.conf"<br>
export TSLIB_PLUGINDIR="/usr/lib/ts"<br>
export TSLIB_FBDEVICE=/dev/fb0<br>
export TSLIB_CONSOLEDEVICE=none<br>
export TSLIB_TSDEVICE=/dev/input/event1<br>
ts_calibrate<br>
<br>
I get some numbers on /etc/pointercal but there are quite different if I<br>
run ts_calibrate a few times. In any case, the touchscreen is still<br>
totally mad and I can't use xvkbd to input the login info. In the best<br>
case scenario, the pointer is around 200x200 pixels NW from the touch.<br>
<br>
Then, I have played with xorg.conf. I have tried the rotate option and<br>
many other things, but unsuccessfully.<br>
<br>
Any idea? Thanks in advance,<br>
<br>
Gregoire<br>
<br>
PS: In case, you ask:<br>
<br>
more /etc/ts.conf<br>
# Uncomment if you wish to use the linux input layer event interface<br>
module_raw input<br>
<br>
# Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d<br>
# module_raw collie<br>
<br>
# Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860<br>
# module_raw corgi<br>
<br>
# Uncomment if you're using a device with a UCB1200/1300/1400 TS<br>
interface<br>
# module_raw ucb1x00<br>
<br>
# Uncomment if you're using an HP iPaq h3600 or similar<br>
# module_raw h3600<br>
<br>
# Uncomment if you're using a Hitachi Webpad<br>
# module_raw mk712<br>
<br>
# Uncomment if you're using an IBM Arctic II<br>
# module_raw arctic2<br>
<br>
module pthres pmin=1<br>
module variance delta=30<br>
module dejitter delta=100<br>
module linear<br>
<br>
<br>
<br>
<br>
_______________________________________________<br>
Openmoko community mailing list<br>
<a href="mailto:community@lists.openmoko.org">community@lists.openmoko.org</a><br>
<a href="http://lists.openmoko.org/mailman/listinfo/community" target="_blank">http://lists.openmoko.org/mailman/listinfo/community</a><br>
</blockquote></div><br></div>