<div dir="ltr">I had slightly more luck with the opensource zaurus driver also mentioned on the mac page - but I found neither solution worked well - after rebooting 6 or 7 times I think I managed to get the USB networking going once. I'm afraid I gave up and ended up just using a linux server that I was fortunate to have access to...<br>
<br>
I tried briefly using a Linux vmware image, but I also couldn't get that working.<br><br>If anyone else has managed to get this to work, I'd love to hear about it...<br><br>Warren<br><br><br><div class="gmail_quote">
On Thu, Sep 11, 2008 at 6:25 PM, Lally Singh <span dir="ltr"><<a href="mailto:lally.singh@gmail.com">lally.singh@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hey all,<br>
<br>
Just got the FR yesterday (nice physical design). I installed the<br>
patched network driver listed under "Apple CDC Ethernet driver<br>
10.5.x," and the Networking pane shows a USB serial connection, but no<br>
ethernet. It also does not show up as enXX in ifconfig.<br>
<br>
This is OS X <a href="http://10.5.4." target="_blank">10.5.4.</a> I can use dfu-util fine. But, I haven't found<br>
a way to get the wifi working yet, so the device is networkless.<br>
<br>
Anyone else have a mac with a working usb networking setup? What'd<br>
you do? I'll happily update the wiki with the result.<br>
<br>
Here's my ifconfig when the device is plugged in (this was right<br>
before I did the dfu-util reflash):<br>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384<br>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1<br>
inet <a href="http://127.0.0.1" target="_blank">127.0.0.1</a> netmask 0xff000000<br>
inet6 ::1 prefixlen 128<br>
inet6 fd5d:a24b:2849:fed7:217:f2ff:fece:65ba prefixlen 128<br>
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280<br>
stf0: flags=0<> mtu 1280<br>
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500<br>
ether 00:17:f2:ce:65:ba<br>
media: autoselect status: inactive<br>
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP<br>
<full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP<br>
<full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX<br>
<full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX<br>
<full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT<br>
<full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none<br>
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030<br>
lladdr 00:19:e3:ff:fe:22:6b:5c<br>
media: autoselect <full-duplex> status: inactive<br>
supported media: autoselect <full-duplex><br>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500<br>
inet6 fe80::219:e3ff:fe04:85c2%en1 prefixlen 64 scopeid 0x6<br>
inet <a href="http://10.0.1.2" target="_blank">10.0.1.2</a> netmask 0xffffff00 broadcast <a href="http://10.0.1.255" target="_blank">10.0.1.255</a><br>
ether 00:19:e3:04:85:c2<br>
media: autoselect status: active<br>
supported media: autoselect<br>
vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500<br>
inet <a href="http://172.16.1.1" target="_blank">172.16.1.1</a> netmask 0xffffff00 broadcast <a href="http://172.16.1.255" target="_blank">172.16.1.255</a><br>
ether 00:50:56:c0:00:08<br>
vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500<br>
inet <a href="http://172.16.74.1" target="_blank">172.16.74.1</a> netmask 0xffffff00 broadcast <a href="http://172.16.74.255" target="_blank">172.16.74.255</a><br>
ether 00:50:56:c0:00:01<br>
<br>
Thanks in advance!<br>
<br>
-ls<br>
<br>
--<br>
H. Lally Singh<br>
Ph.D. Candidate, Computer Science<br>
Virginia Tech<br>
<br>
_______________________________________________<br>
Openmoko community mailing list<br>
<a href="mailto:community@lists.openmoko.org">community@lists.openmoko.org</a><br>
<a href="http://lists.openmoko.org/mailman/listinfo/community" target="_blank">http://lists.openmoko.org/mailman/listinfo/community</a><br>
</blockquote></div><br></div>