<div dir="ltr">On Mon, Sep 15, 2008 at 9:13 AM, Andy Green <span dir="ltr"><<a href="mailto:andy@openmoko.com">andy@openmoko.com</a>></span> wrote:<br><div class="gmail_quote"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Can you confirm if you need the idle clock set to 1? What I think I<br>
understood about this issue is that it is timeout-related only, it means<br>
I didn't actually understand what is going on if it needs idle clocks too.<br>
</blockquote></div><br>i am now sure: i don't need it. I made many other experiments (about log2(50)) and i found out that the maximum value for the sd_max_clock which can still read the card is <br><br>int(50MHz / 19) =2631578 Hz<br>
<br>(why this value? maybe something crucial happens at low level when you raise from this value?)<br>Anyway, i don't absolutely need the idleclock, it was just one of the thing tried to make it work. <br>Probably the problem is just that i bought a very slow card.. I hope that performances will be sufficient to boot something from it, or maybe i could keep it just to save my mp3s..<br>
<br>i attach my u-boot environment, just in case anyone pass through the same pain he can try to take inspiration from it. the menus which successfully boot with the card are the 4 and the 10.<br><br>if any other test could be useful to debug just tell me what to do.. at the moment i don't mind loosing the card content, i just put an experimental environment inside, and it seems not to boot very well..<br>
<br>roby<br><br></div>