<br>On Fri, Dec 5, 2008 at 3:25 PM, Tony Berth <span dir="ltr"><<a href="mailto:tonyberth@googlemail.com">tonyberth@googlemail.com</a>></span> wrote:<br><div class="gmail_quote"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div class="Ih2E3d"><br>On Fri, Dec 5, 2008 at 2:45 PM, Andy Green <span dir="ltr"><<a href="mailto:andy@openmoko.com" target="_blank">andy@openmoko.com</a>></span> wrote:<br></div><div class="gmail_quote"><div class="Ih2E3d">
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
-----BEGIN PGP SIGNED MESSAGE-----<br>
Hash: SHA1<br>
<div><br>
Somebody in the thread at some point said:<br>
<br>
| When in BootLoader, shows that there is a card of 3MB!!!! and when I<br>
| boot with the latest 2008.9 jffs I get following dmesg output:<br>
<br>
</div>U-Boot driver doesn't understand enough SHDC to get this right, but it<br>
doesn't hurt anything unless you try to get U-Boot to touch anything<br>
above 4GB.<br>
<br>
| ....<br>
| [ 30.365000] Buffer I/O error on device mmcblk0, logical block 8<br>
<br>
Are there some glamo-mci errors floating around before that?<br>
<br>
- -Andy<br>
-----BEGIN PGP SIGNATURE-----<br>
Version: GnuPG v1.4.9 (GNU/Linux)<br>
Comment: Using GnuPG with Fedora - <a href="http://enigmail.mozdev.org" target="_blank">http://enigmail.mozdev.org</a><br>
<br>
iEYEARECAAYFAkk5MHYACgkQOjLpvpq7dMrj9QCfbXf7x2O6jtB0X+SfRTv/0e8k<br>
M2gAnjxeXYIDq53UrZC+mcAhm1zI02fR<br>
=jDld<br>
-----END PGP SIGNATURE-----<br>
<br>
</blockquote></div><div><br>here it is:<br><br>-----------------------<br>[ 30.225000] glamo-mci glamo-mci.0: Error after cmd: 0x8020<br>[ 30.225000] mmcblk0: error -110 sending read/write command<br>[ 30.230000] end_request: I/O error, dev mmcblk0, sector 0<br>
[ 30.230000] Buffer I/O error on device mmcblk0, logical block 0<br>[ 30.240000] glamo-mci glamo-mci.0: Error after cmd: 0x20<br>[ 30.240000] glamo-mci glamo-mci.0: Error after cmd: 0x120<br>[ 30.245000] mmcblk0: error -110 sending read/write command<br>
[ 30.250000] end_request: I/O error, dev mmcblk0, sector 8<br>[ 30.250000] Buffer I/O error on device mmcblk0, logical block 1<br>[ 30.255000] glamo-mci glamo-mci.0: Error after cmd: 0x8020<br>[ 30.255000] glamo-mci glamo-mci.0: Error after cmd: 0x8122<br>
[ 30.260000] mmcblk0: error -84 sending read/write command<br>[ 30.265000] end_request: I/O error, dev mmcblk0, sector 16<br>[ 30.265000] Buffer I/O error on device mmcblk0, logical block 2<br>[ 30.270000] glamo-mci glamo-mci.0: Error after cmd: 0x20<br>
[ 30.275000] glamo-mci glamo-mci.0: Error after cmd: 0x122<br>[ 30.280000] mmcblk0: error -84 sending read/write command<br>[ 30.285000] end_request: I/O error, dev mmcblk0, sector 24<br>[ 30.285000] Buffer I/O error on device mmcblk0, logical block 3<br>
[ 30.300000] glamo-mci glamo-mci.0: Error after cmd: 0x8020<br>[ 30.300000] mmcblk0: error -110 sending read/write command<br>[ 30.305000] end_request: I/O error, dev mmcblk0, sector 0<br>[ 30.305000] Buffer I/O error on device mmcblk0, logical block 0<br>
[ 30.360000] glamo-mci glamo-mci.0: Error after cmd: 0x20<br>[ 30.360000] mmcblk0: error -110 sending read/write command<br>[ 30.365000] end_request: I/O error, dev mmcblk0, sector 64<div class="Ih2E3d"><br>[ 30.365000] Buffer I/O error on device mmcblk0, logical block 8<br>
[ 34.830000] FAT: bogus logical sector size 65535<br>[ 34.830000] VFS: Can't find a valid FAT filesystem on dev mmcblk0.<br>[ 34.840000] FAT: bogus logical sector size 65535<br>[ 34.840000] VFS: Can't find a valid FAT filesystem on dev mmcblk0.<br>
<br></div>------------------------<br><br>Thanks <br></div></div><br>
</blockquote></div><br>some more feedback:<br><br>I did format my card with '<a href="http://www.sdcard.org/consumers/formatter/">http://www.sdcard.org/consumers/formatter/</a>' but still doesn't work on FR. I get following dmesg:<br>
<br>-----------------------<br>[ 73.055000] glamo-mci glamo-mci.0: Error after cmd: 0x8020<br>[ 73.055000] glamo-mci glamo-mci.0: Error after cmd: 0x8120<br>[ 73.060000] mmcblk0: error -110 sending read/write command<br>
[ 73.065000] end_request: I/O error, dev mmcblk0, sector 0<br>[ 73.065000] Buffer I/O error on device mmcblk0, logical block 0<br>[ 73.070000] glamo-mci glamo-mci.0: Error after cmd: 0x20<br>[ 73.070000] glamo-mci glamo-mci.0: Error after cmd: 0x122<br>
[ 73.075000] mmcblk0: error -84 sending read/write command<br>[ 73.080000] end_request: I/O error, dev mmcblk0, sector 8<br>[ 73.080000] Buffer I/O error on device mmcblk0, logical block 1<br>[ 73.090000] glamo-mci glamo-mci.0: Error after cmd: 0x8020<br>
[ 73.090000] glamo-mci glamo-mci.0: Error after cmd: 0x8122<br>[ 73.095000] mmcblk0: error -84 sending read/write command<br>[ 73.100000] end_request: I/O error, dev mmcblk0, sector 16<br>[ 73.100000] Buffer I/O error on device mmcblk0, logical block 2<br>
[ 73.105000] glamo-mci glamo-mci.0: Error after cmd: 0x20<br>[ 73.105000] glamo-mci glamo-mci.0: Error after cmd: 0x122<br>[ 73.110000] mmcblk0: error -84 sending read/write command<br>[ 73.115000] end_request: I/O error, dev mmcblk0, sector 24<br>
[ 73.115000] Buffer I/O error on device mmcblk0, logical block 3<br>[ 73.125000] glamo-mci glamo-mci.0: Error after cmd: 0x8020<br>[ 73.125000] glamo-mci glamo-mci.0: Error after cmd: 0x8122<br>[ 73.130000] mmcblk0: error -84 sending read/write command<br>
[ 73.135000] end_request: I/O error, dev mmcblk0, sector 0<br>[ 73.135000] Buffer I/O error on device mmcblk0, logical block 0<br>--------------------------<br><br>any help?<br><br>Thanks<br><br>Tony<br><br><br>