<div>
I'm using OM2008.12 with no problems: networking and SSH works well.<br><br>I had some problems the first time to install the terminal! Why they don't include terminal by default?!<br><br>However, connecting the neo to pc through USB cable works for me. I gave the following command:<br><br>sudo ifconfig usb0 192.168.0.200 netmask 255.255.255.0<br><br>and then<br><br>ssh root@192.168.0.202 and it's worked for me. <br><br>I've noticed that if you are connected to a network that has different addresses (your IP different from 192.168.0.*) the connection could not work. So try to disconnect from the network (sudo ifconfig ethX down), connect the neo to USB, wait a few seconds, type again the above command and try again with ssh.<br><br>It worked for me. Hope this can help you.<br>
<br>
<blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;">----- Original Message -----<br>
From: steve <dlist@bluewin.ch><br>
To: community@lists.openmoko.org<br>
Subject: No dropbear in om2008.12 ?<br>
Date: Mon, 22 Dec 2008 13:50:37 +0100<br>
<br>

<br>
<br>
Hi,<br>
<br>
Two months ago I bought the FR and installed the om2008.8 version<br>
without too much worry. This last week-end, after reading this list, I<br>
decided to flash the om2008.12 version. So I downloaded the kernel and<br>
the rootfs from here http://downloads.openmoko.org/releases/Om2008.12/<br>
and then flashed it, no problem.<br>
<br>
Then I rebooted and pluged in the usb cable and tried to connect, no<br>
success. I can ping 192.168.0.202 but not connect via ssh. I then <br>
tried to nmap<br>
the FR and the result was "all ports filtered".<br>
<br>
After reading the differents lists and forums, it seems that one must<br>
reboot a second time after flashing in order to get networking running,<br>
which i did, but still no sucess.<br>
<br>
Then I figured I should maybe activate dropbear from within the FR but<br>
big surprise, there is no terminal!<br>
<br>
I finally decided to flash with the om2008.9 version, hoping that these<br>
problems would vanish but no, still same problem.<br>
<br>
Now I don't know what to do more.<br>
<br>
Any ideas ?<br>
<br>
Thanks,<br>
Steve<br>
<br>
_______________________________________________<br>
Openmoko community mailing list<br>
community@lists.openmoko.org<br>
http://lists.openmoko.org/mailman/listinfo/community<br>
</dlist@bluewin.ch></blockquote>
</div>
<BR>

-- 
<div> Be Yourself @ mail.com!<br>
Choose From 200+ Email Addresses<br>
Get a <b>Free</b> Account at <a href="http://www.mail.com/Product.aspx" target="_blank">www.mail.com</a>!</div>