<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
Mike Montour wrote:
<blockquote cite="mid:gjrqcd$1o7$1@ger.gmane.org" type="cite">
<pre wrap="">Vasili Sviridov wrote:
</pre>
<blockquote type="cite">
<pre wrap="">Ok, that made it even worse :(
Now I only have NOR uBoot and dfu-util still gives me only 1 alternate
there which is "USB Device Firmware Upgrade".
Cannot flash the NAND uBoot, since dfu-util does not see the required
partition...
</pre>
</blockquote>
<pre wrap=""><!---->
Don't pay too much attention to the "dfu-util -l" output - there are two
different modes the device can be in, and in the default one you don't
see the other alternate settings listed. When you run the dfu-util
Download command it should automatically set the device into the
required mode. If it fails then try running the exact same command a
second time - sometimes it fails on the first try.</pre>
</blockquote>
Thanks, what's the good version of NAND uBoot to flash?<br>
<br>
V.<br>
</body>
</html>