<br><br><div class="gmail_quote">On Tue, Feb 3, 2009 at 9:48 PM, Petr Vanek <span dir="ltr"><<a href="mailto:vanous@penguin.cz">vanous@penguin.cz</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
...<br>
i understand that this is when you run system from sd card. i run<br>
system from NAND and for that i need to edit the boot environment <br></blockquote><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">...<br>
I had flashed u-boot back but would love to use qi again as it can start<br>
the neo on a short pwr press, has no logo and is faster...</blockquote><div><br>Not sure I understood what you wanted correctly, so please don't hesitate to ask again - but if you want to use Qi to boot from NAND the procedure is the same as from SD-Card: <br>
<br>- setup your /boot directory (in NAND!) with the Qi specific files uImage-GTA02.bin (needed), append-GTA02 (optional) and noboot-GTA02 (you don't want that) exactly as you would for an SD-Card partition <br>- then power up normally<br>
- if you have Qi set up for any of the first 3 partitions on SD-Card they would first be booted : Therefore press AUX just after the FR vibrates once for every partition you want to skip, then as a final resort NAND will be tried. Or, put noboot-GTA02 to skip automatically wherever appropriate.<br>
<br>HTH, <br><br>Stefan<br><br></div></div><br>