Hi,<br><br>I try to install latest shr-testing image got at <a href="http://build.shr-project.org/shr-testing/images/om-gta02/openmoko-shr-image-glibc-ipk--20090416-om-gta02.rootfs.tar.gz" target="_blank">http://build.shr-project.org/shr-testing/images/om-gta02/openmoko-shr-image-glibc-ipk--20090416-om-gta02.rootfs.tar.gz</a><br>
i untar the content on a ext2 ( tested a ext3) too and boot with Qi on
it, this is on a usdcard on the 3rd partition ( 2nd is android that was
booting until i put noboot option ).<br>i put rootdelay=5 on /boot/append since it is on ucard<br>
It just boot and start Xglamo but a white windows come up with
enligthment SIGKILL'd and i can retry many times it doesn't come up.<br>ssh & usbnet conenctivty is working and if i launch enlightment_strat by hand it complains BUS_ERROR <br>
<br>root@om-gta02 ~ $ Xglamo& <br>root@om-gta02 ~ $ (II) verbosity set to 5<br>Using GLAMO 3362 card<br>(II) Screen: 16/16 depth/bpp<br>(II) vram size:4194304, onscreen vram size:614400, offscreen vram size:3579904<br>
(II) initialising offscreen pixmaps<br>Extended Input Devices not yet supported. Impelement it at line 647 in kinput.c<br><br>root@om-gta02 ~ $ <br>root@om-gta02 ~ $ enlightenment_start<br>E - PID=2209, do_precache=0<br>
ESTART: 0.00041 [0.00041] - begin<br>
ESTART: 0.01203 [0.01163] - signals done<br>ESTART: 0.02210 [0.01007] - determine prefix<br>e_prefix_determine()<br>DYNAMIC DETERMINED PREFIX: /usr<br>ESTART: 0.05705 [0.03495] - prefix done<br>ESTART: 0.06641 [0.00936] - eina init<br>
ESTART: 0.11270 [0.04629] - intl init<br>ESTART: 0.12229 [0.00959] - parse args<br>ESTART: 0.13078 [0.00849] - arg parse done<br>ESTART: 0.13942 [0.00863] - ecore init<br>ESTART: 0.17632 [0.03690] - ecore_file init<br>ESTART: 0.18964 [0.01332] - more ecore<br>
ESTART: 0.19760 [0.00796] - x connect<br>ESTART: 0.48743 [0.28983] - ecore_con<br>ESTART: 1.87269 [1.38526] - xinerama<br>E17 INIT: XINERAMA CHOSEN: [0], 480x640+0+0<br>ESTART: 1.89923 [0.02654] - x hints<br>ESTART: 1.91815 [0.01892] - x hints done<br>
ESTART: 1.92139 [0.00325] - ecore_evas init<br>ESTART: 1.94193 [0.02054] - test done<br>ESTART: 1.95010 [0.00817] - efreet<br>ESTART: 1.97073 [0.02063] - efreet done<br>ESTART: 1.97889 [0.00816] - configure<br>ESTART: 1.98905 [0.01016] - dirs<br>
ESTART: 2.00344 [0.01439] - filereg<br>ESTART: 2.01261 [0.00916] - config<br>**** BUS ERROR ****<br><br>What did i miss ? Is that image correct ?<br>What is the correct image to have a working environment ?<br>Why does it mount root as ext4 ? ( with ext2 installation it complained about circular references )<br>
<br>I am willing to help but in testing it seems there is no gdb what doesn't help to debug things.<br><br>Please appologize if i polute the mailling list with usless remarks.<br><br>Regards<br><font color="#888888">Philippe</font>