hello list. I updated my OM2009 installation (3-4 days old) with opkg update - opkg upgrade. After having accepted the new config files and rebooted the gsm service cannot start anymore.<br><br>here is my dmesg, if anyone can understand what's happening:<br>
<br><br clear="all">root@om-gta02:~# dmesg<br>pr-ub-env"<br>[21474537.485000] 0x000000080000-0x000000880000 : "kernel"<br>[21474537.490000] 0x000000880000-0x000000920000 : "depr"<br>[21474537.500000] 0x000000920000-0x000000960000 : "identity-ext2"<br>
[21474537.505000] 0x000000960000-0x000010000000 : "rootfs"<br>[21474537.515000] initialised ok<br>[21474537.530000] usbcore: registered new interface driver libusual<br>[21474537.545000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes<br>
[21474537.545000] gta02_udc_command S3C2410_UDC_P_DISABLE<br>[21474537.550000] mice: PS/2 mouse device common for all mice<br>[21474537.565000] i2c /dev entries driver<br>[21474537.570000] s3c2440-i2c s3c2440-i2c: slave address 0x10<br>
[21474537.575000] s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz<br>[21474537.600000] pcf50633 0-0073: Probed device version 19 variant 132<br>[21474537.655000] input: PCF50633 PMU events as /class/input/input0<br>
[21474537.700000] pcf50633-rtc: dev (254:0)<br>[21474537.700000] pcf50633-rtc pcf50633-rtc: rtc core: registered pcf50633-rtc as rtc0<br>[21474537.720000] regulator: auto: 3300 mV normal <br>[21474537.725000] regulator: down1: 1300 <--> 1600 mV normal <br>
[21474537.740000] regulator: down2: 1800 mV normal <br>[21474537.745000] regulator: ldo1: 3300 <--> 1300 mV normal <br>[21474537.760000] regulator: ldo2: 3300 mV normal <br>[21474537.775000] regulator: ldo3: 3000 mV normal <br>
[21474537.790000] regulator: ldo4: 3200 mV normal <br>[21474537.790000] neo1973-pm-bt neo1973-pm-bt.0: FIC Neo1973 Bluetooth Power Management: starting<br>[21474537.800000] neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 1<br>
[21474537.845000] regulator: ldo5: 3000 mV normal <br>[21474537.845000] neo1973-pm-gps neo1973-pm-gps.0: FIC Neo1973 GPS Power Managerment:starting<br>[21474537.870000] regulator: ldo6: 3000 mV normal <br>[21474537.875000] regulator: hcldo: 2000 <--> 3300 mV normal <br>
[21474537.885000] Detected S-Media IRQ# pullup, enabling interrupt<br>[21474537.885000] glamo3362 glamo3362.0: Glamo interrupt registered<br>[21474537.925000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz<br>
[21474537.935000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc.<br>[21474538.000000] glamo-fb glamo-fb.0: spin_lock_init<br>[21474538.005000] fbcon_event_notify action=5, data=c781f800<br>[21474538.080000] Console: switching to colour frame buffer device 80x58<br>
[21474538.150000] fb0: SMedia Glamo frame buffer device<br>[21474538.245000] glamo-spi-gpio glamo-spi-gpio.0: registering c03be6c8: jbt6k74<br>[21474538.645000] Generic Backlight Driver Initialized.<br>[21474538.645000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc<br>
[21474538.645000] glamo-mci glamo-mci.0: probe: mapped mci_base:c88ee400 irq:0.<br>[21474538.650000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down.<br>[21474538.650000] glamo-mci glamo-mci.0: initialisation done.<br>
[21474538.655000] regulator: memldo: 1800 mV normal <br>[21474538.655000] wake enabled for irq 53<br>[21474538.660000] s3c2440-ts s3c2440-ts: Starting<br>[21474538.660000] Created group ts filter len 12 depth 2 close 10 thresh 6<br>
[21474538.660000] Created Median ts filter len 20 depth 2 dec 24<br>[21474538.660000] Created Mean ts filter len 4 depth 2 thresh 65535<br>[21474538.660000] Created Linear ts filter depth 2<br>[21474538.660000] s3c2440-ts s3c2440-ts: 4 filter(s) initialized<br>
[21474538.660000] s3c2440-ts s3c2440-ts: successfully loaded<br>[21474538.665000] input: s3c2410 TouchScreen as /class/input/input1<br>[21474538.680000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0<br>
[21474538.690000] SD power -> 3200mV<br>[21474538.690000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0<br>[21474538.690000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0<br>
[21474538.690000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0<br>[21474538.695000] glamo-mci glamo-mci.0: Error after cmd: 0x120<br>[21474538.695000] glamo-mci glamo-mci.0: Error after cmd: 0x8120<br>
[21474538.695000] glamo-mci glamo-mci.0: Error after cmd: 0x120<br>[21474538.695000] glamo-mci glamo-mci.0: Error after cmd: 0x8120<br>[21474538.695000] glamo-mci glamo-mci.0: Error after cmd: 0x120<br>[21474538.705000] SD power -> 2700mV<br>
[21474538.705000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0<br>[21474538.705000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0<br>[21474538.705000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0<br>
[21474538.705000] glamo-mci glamo-mci.0: Error after cmd: 0x120<br>[21474538.720000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0<br>[21474538.740000] neo1973-pm-host neo1973-pm-host.0: starting<br>
[21474538.745000] input: lis302-1 (top) as /class/input/input2<br>[21474538.755000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req: 195kHz). Bus width=0<br>[21474538.755000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=0<br>
[21474538.755000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req: 16666kHz). Bus width=2<br>[21474538.755000] mmc0: new high speed SD card at address b368<br>[21474538.765000] lis302dl lis302dl.1: Found lis302-1 (top)<br>
[21474538.770000] input: lis302-2 (bottom) as /class/input/input3<br>[21474538.795000] lis302dl lis302dl.2: Found lis302-2 (bottom)<br>[21474538.800000] input: Neo1973 Buttons as /class/input/input4<br>[21474538.850000] wake enabled for irq 48<br>
[21474538.850000] neo1973-resume neo1973-resume.0: starting<br>[21474538.855000] s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter<br>[21474538.870000] APM Battery Driver<br>[21474538.895000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc<br>
[21474538.900000] cpuidle: using governor ladder<br>[21474538.900000] mmcblk0: mmc0:b368 UD 486 MiB <br>[21474538.905000] mmcblk0: p1<br>[21474539.330000] Registered led device: neo1973:vibrator<br>[21474539.335000] Registered led device: gta02-power:orange<br>
[21474539.340000] Registered led device: gta02-power:blue<br>[21474539.340000] Registered led device: gta02-aux:red<br>[21474539.390000] usbcore: registered new interface driver usbhid<br>[21474539.390000] usbhid: v2.6:USB HID core driver<br>
[21474539.395000] logger: created 64K log 'log_main'<br>[21474539.400000] logger: created 256K log 'log_events'<br>[21474539.400000] logger: created 64K log 'log_radio'<br>[21474539.420000] TCP cubic registered<br>
[21474539.420000] NET: Registered protocol family 17<br>[21474539.425000] Bridge firewalling registered<br>[21474539.450000] pcf50633-rtc pcf50633-rtc: PCF_TIME: 14.06.09 13:05:26<br>[21474539.450000] pcf50633-rtc pcf50633-rtc: RTC_TIME: 14.6.109 13:5:26<br>
[21474539.450000] pcf50633-rtc pcf50633-rtc: setting system clock to 2009-07-14 13:05:26 UTC (1247576726)<br>[21474539.450000] Waiting 1sec before mounting root device...<br>[21474540.500000] EXT4-fs: delayed allocation enabled<br>
[21474540.500000] EXT4-fs: mballoc enabled<br>[21474540.500000] EXT4-fs: mounted filesystem mmcblk0p1 without journal<br>[21474540.500000] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.<br>[21474540.500000] Freeing init memory: 136K<br>
[21474565.935000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver<br>[21474565.950000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI<br>[21474566.010000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1<br>
[21474566.010000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000<br>[21474566.040000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics<br>[21474566.080000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001<br>
[21474566.080000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1<br>[21474566.080000] usb usb1: Product: S3C24XX OHCI<br>[21474566.080000] usb usb1: Manufacturer: Linux 2.6.29-rc2 ohci_hcd<br>[21474566.080000] usb usb1: SerialNumber: s3c24xx<br>
[21474566.080000] usb usb1: configuration #1 chosen from 1 choice<br>[21474566.095000] hub 1-0:1.0: USB hub found<br>[21474566.095000] hub 1-0:1.0: 2 ports detected<br>[21474566.170000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled<br>
[21474566.290000] s3c2440-sdi s3c2440-sdi: host detect has no irq available<br>[21474566.290000] mapped channel 0 to 0<br>[21474566.290000] regulator: Unable to get requested regulator: SD_3V3<br>[21474566.305000] s3c2440-sdi s3c2440-sdi: Regulator for SD_3V3 unavilable <br>
[21474566.495000] usb 1-1: new full speed USB device using s3c2410-ohci and address 2<br>[21474566.510000] s3c2440-sdi s3c2440-sdi: powered down.<br>[21474566.510000] s3c2440-sdi s3c2440-sdi: initialisation done.<br>[21474566.515000] s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).<br>
[21474566.520000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).<br>[21474566.520000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).<br>[21474566.525000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).<br>
[21474566.530000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).<br>[21474566.545000] s3c2440-sdi s3c2440-sdi: running at 196kHz (requested: 195kHz).<br>[21474566.555000] mmc1: queuing CIS tuple 0x01 length 3<br>
[21474566.575000] mmc1: queuing CIS tuple 0x1a length 5<br>[21474566.580000] mmc1: queuing CIS tuple 0x1b length 8<br>[21474566.585000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).<br>[21474566.585000] s3c2440-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz).<br>
[21474566.590000] mmc1: queuing CIS tuple 0x80 length 1<br>[21474566.590000] mmc1: queuing CIS tuple 0x81 length 1<br>[21474566.590000] mmc1: queuing CIS tuple 0x82 length 1<br>[21474566.590000] mmc1: new SDIO card at address 0001<br>
[21474566.755000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001<br>[21474566.755000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0<br>[21474566.755000] usb 1-1: configuration #1 chosen from 1 choice<br>
[21474568.855000] Bluetooth: Core ver 2.14<br>[21474568.855000] NET: Registered protocol family 31<br>[21474568.855000] Bluetooth: HCI device and connection manager initialized<br>[21474568.865000] Bluetooth: HCI socket layer initialized<br>
[21474570.385000] HIFInit<br>[21474570.610000] Bluetooth: Generic Bluetooth USB driver ver 0.4<br>[21474570.615000] usbcore: registered new interface driver btusb<br>[21474571.420000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1)<br>
[21474571.420000] eth0 (sdio_ar6000): not using net_device_ops yet<br>[21474571.485000] AR6000 Reg Code = 0x40000060<br>[21474572.230000] EXT4-fs warning: mounting unchecked fs, running e2fsck is recommended<br>[21474572.235000] EXT4 FS on mmcblk0p1, no journal<br>
[21474572.685000] usb0: MAC 00:1f:11:01:3e:b0<br>[21474572.685000] usb0: HOST MAC 00:1f:11:01:3e:b1<br>[21474572.685000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008<br>[21474572.685000] g_ether gadget: g_ether ready<br>
[21474572.685000] gta02_udc_command S3C2410_UDC_P_ENABLE<br>[21474573.025000] Bluetooth: L2CAP ver 2.11<br>[21474573.025000] Bluetooth: L2CAP socket layer initialized<br>[21474573.320000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2<br>
[21474577.030000] NET: Registered protocol family 10<br>[21474577.760000] Bluetooth: RFCOMM socket layer initialized<br>[21474577.760000] Bluetooth: RFCOMM TTY layer initialized<br>[21474577.760000] Bluetooth: RFCOMM ver 1.10<br>
[21474580.265000] No device for DAI dummy1<br>[21474580.265000] No device for DAI dummy2<br>[21474580.495000] No device for DAI s3c24xx-i2s<br>[21474580.635000] No device for DAI Bluetooth<br>[21474580.635000] WM8753 Audio Codec 0.16<br>
[21474580.660000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok<br>[21474580.665000] asoc: WM8753 Voice <-> Bluetooth mapping ok<br>[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Playback Mixer Voice Capture Switch' truncated to 31 characters.<br>
[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Playback Mixer Left Capture Switch' truncated to 31 characters.<br>[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Playback Mixer Right Capture Switch' truncated to 31 characters.<br>
[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer Right Playback Switch' truncated to 31 characters.<br>[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer Voice Playback Switch' truncated to 31 characters.<br>
[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer Sidetone Playback Switch' truncated to 31 characters.<br>[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Mono Mixer Bypass Playback Switch' truncated to 31 characters.<br>
[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer Voice Playback Switch' truncated to 31 characters.<br>[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer Sidetone Playback Switch' truncated to 31 characters.<br>
[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer Right Playback Switch' truncated to 31 characters.<br>[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Right Mixer Bypass Playback Switch' truncated to 31 characters.<br>
[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Left Mixer Voice Playback Switch' truncated to 31 characters.<br>[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Left Mixer Sidetone Playback Switch' truncated to 31 characters.<br>
[21474580.795000] sound/soc/soc-dapm.c:349 mixer name 'Left Mixer Bypass Playback Switch' truncated to 31 characters.<br>[21474584.435000] ADDRCONF(NETDEV_UP): usb0: link is not ready<br>[21474585.805000] pcf50633-rtc pcf50633-rtc: PCF_TIME: 14.06.09 13:06:12<br>
[21474585.805000] pcf50633-rtc pcf50633-rtc: RTC_TIME: 14.6.109 13:6:12<br>[21474585.835000] pcf50633 0-0073: Masking IRQ 7<br>[21474585.855000] pcf50633 0-0073: Masking IRQ 7<br>[21474594.705000] fbcon_event_notify action=1, data=c70a3dd0<br>
[21474621.270000] Bluetooth: SCO (Voice Link) ver 0.6<br>[21474621.270000] Bluetooth: SCO socket layer initialized<br>[21474623.005000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3<br>[21474623.005000] Bluetooth: BNEP filters: protocol multicast<br>
[21474629.320000] eth0: no IPv6 routers present<br>[21474634.330000] EXT4-fs error (device mmcblk0p1): ext4_free_data: circular indirect block detected, inode=43079, block=16728<br>[21474657.150000] fbcon_event_notify action=9, data=c70a3de8<br>
[21474657.150000] jbt6k74 spi2.0: **** jbt6k74 vsync suspend<br>[21474662.230000] fbcon_event_notify action=9, data=c70a3de8<br>[21474662.230000] jbt6k74 spi2.0: **** jbt6k74 hsync suspend<br>[21474666.650000] mapped channel 10 to 2<br>
[21474667.310000] fbcon_event_notify action=9, data=c70a3de8<br>[21474667.310000] jbt6k74 spi2.0: **** jbt6k74 powerdown<br>[21474669.130000] fbcon_event_notify action=12, data=c70a3dac<br>[21474669.130000] jbt6k74 spi2.0: **** jbt6k74 unblank<br>
[21474669.255000] fbcon_event_notify action=9, data=c70a3de8<br>[21474669.255000] jbt6k74 spi2.0: **** jbt6k74 unblank<br>[21474685.930000] rxerr: port ch=0x00, rxs=0x0000000d<br>[21474685.960000] rxerr: port ch=0x00, rxs=0x0000000c<br>
[21474688.110000] modem wakeup interrupt<br>[21474695.740000] rxerr: port ch=0x00, rxs=0x0000000c<br>[21474695.740000] rxerr: port ch=0x00, rxs=0x0000000c<br>[21474707.725000] pcf50633-rtc pcf50633-rtc: PCF_TIME: 14.06.09 13:08:14<br>
[21474707.725000] pcf50633-rtc pcf50633-rtc: RTC_TIME: 14.6.109 13:8:14<br>[21474707.775000] pcf50633-rtc pcf50633-rtc: PCF_TIME: 14.06.09 13:08:14<br>[21474707.775000] pcf50633-rtc pcf50633-rtc: RTC_TIME: 14.6.109 13:8:14<br>
[ 23.535000] g_ether gadget: full speed config #1: CDC Ethernet (ECM)<br>[ 23.540000] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready<br>[ 25.835000] pcf50633 0-0073: usb curlim to 500 mA<br>[ 34.035000] usb0: no IPv6 routers present<br>
[ 40.130000] fbcon_event_notify action=9, data=c70a3de8<br>[ 40.130000] jbt6k74 spi2.0: **** jbt6k74 vsync suspend<br>[ 45.205000] fbcon_event_notify action=9, data=c70a3de8<br>[ 45.205000] jbt6k74 spi2.0: **** jbt6k74 hsync suspend<br>
<br>-- <br>roby<br>