Note: it works fine manually. It still doesn't work from the GUI or with the lan-network script.<br><br><div class="gmail_quote">On Thu, Sep 24, 2009 at 9:38 PM, Torfinn Ingolfsen <span dir="ltr"><<a href="mailto:tingox@gmail.com">tingox@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">I did another test with wpa_supplicant manually.<br>This time, I looked more closely at the output, and noticed it said "authentication timeout". Duh!<br>
I checked my passphrase in wpa_supplicant.conf - one characyter had the wrong case.<br>
<br>It works now:<br>neo:~# ifconfig eth0<br>eth0 Link encap:Ethernet HWaddr 00:12:cf:8e:e4:11 <br> inet addr:10.1.161.6 Bcast:10.1.255.255 Mask:255.255.0.0<br> inet6 addr: fe80::212:cfff:fe8e:e411/64 Scope:Link<br>
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1<br> RX packets:743 errors:0 dropped:0 overruns:0 frame:0<br> TX packets:193 errors:0 dropped:0 overruns:0 carrier:0<br> collisions:0 txqueuelen:1000 <br>
RX bytes:571745 (558.3 KiB) TX bytes:17229 (16.8 KiB)<br><br>neo:~# iwconfig eth0<br>eth0 AR6000 802.11g ESSID:"kg4" <br> Mode:Managed Frequency:2.417 GHz Access Point: 00:0F:66:51:AA:41 <br>
Bit Rate=48 Mb/s Tx-Power=15 dBm Sensitivity=0/3 <br> Retry:on <br> Encryption key:off<br> Power Management:off<br> Link Quality:194/94 Signal level:-157 dBm Noise level:-96 dBm<br>
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0<br> Tx excessive retries:7 Invalid misc:0 Missed beacon:0<br><br><br>Sorry for all the noise.<br>-- <br>Regards, <br><font color="#888888">Torfinn Ingolfsen<br>
</font></blockquote></div><br><br clear="all"><br>-- <br>mvh<br>Torfinn<br>