Hi,<br><br><div class="gmail_quote">On Thu, Sep 24, 2009 at 9:45 AM, Radek Polak <span dir="ltr"><<a href="mailto:psonek2@seznam.cz">psonek2@seznam.cz</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div class="im">Torfinn Ingolfsen wrote:<br>
<br>
> Another thought crossed my mind:<br>
> Is there a switch (software) that must be turned on to active the<br>
> radio of the WLAN on the FreeRunner?<br>
<br>
</div>In QtMoko the switch is in "Devtools" menu [1] but is not needed. Wlan<br>
works out-of-the box (at least for me).<br></blockquote><div><br>Ok, good to know.<br> <br></div><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Btw are you really using latest QtMoko (=SHR) kernel?</blockquote><div><br>Well, I copied QtMoko v11 (qtmoko-debian-v11.tar.gz) to my SD card (p2 partition. Uname says<br>neo:~# uname -a<br>Linux neo 2.6.29-rc3 #1 PREEMPT Tue Sep 1 23:03:59 CEST 2009 armv4tl GNU/Linux<br>
<br>and this is a newer kernel than the one with QtMoko v9 at least. /proccmdline says:<br>neo:~# cat /proc/cmdline<br>loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs) g_ether.host_addr=00:1F:11:01:0D:38 g_ether.dev_addr=00:1F:11:01:0D:38 root=/dev/mmcblk0p2 rootdelay=1 loglevel=1 quiet splash <br>
<br>I don't know of any other means to identify the QtMoko version I am using. lsb_release isn't there:<br>neo:~# lsb_release -a<br>-bash: lsb_release: command not found<br clear="all"></div></div><br>-- <br>Regards,<br>
Torfinn Ingolfsen<br>