<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<meta content="text/html;charset=us-ascii" http-equiv="Content-Type">
<body bgcolor="#ffffff" text="#000000">
* Denis Johnson wrote, Il 08/02/2010 00:38:<br>
<pre wrap="">If I use the nodebug kernel I can't boot with qi (I use qi installed
by qtmoko v16d installer). It just vibrates once and flashes the red
led but doesn't start to boot. But it does boot if I boot it with
u-boot from NOR.
But with the debug kernel it boots with qi.
<pre wrap="">Can confirm this with qi as well. qtmoko installed on uSD. Anyone know
how can I see the error/provide a log?
I can also confirm this, so I am currently running the normal kernel.
I have also noticed that this image + kernel frequently shows
"searching for network"
I confirm too these problem with Qtmoko-19 (but with the faster kernel).<br>
I can't boot with qi directly, i have to use NOR menu.<br>
And sometime when i boot it starts qtopia normally, but it seems
freezing or not completing the load, and i have to restart qtopia
manually 2 o 3 times to have it work properly.<br>
And me too i have a lot of problem with the "searching network" on Gsm
registration, very problematic to use Qtmoko as a daily phone.<br>
Rather then that: the FR now it's REALLY FAST with the interface!<br>
I like this incredible improvement in velocity, it's huge. Now when i
press a icon it's superfast to load too.<br>
It remains the problem with qi-boot and the GSM registration, that is
Thank you so much Radek and all involved on dev of QtMoko, i really