Hi,<br><br><div class="gmail_quote">On Sat, May 15, 2010 at 11:33 AM, Al Johnson <span dir="ltr"><<a href="mailto:openmoko@mazikeen.demon.co.uk">openmoko@mazikeen.demon.co.uk</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div class="im">On Friday 14 May 2010, Torfinn Ingolfsen wrote:<br>
> Hello,<br>
> I finally found time to test this.<br>
> Without a SD card in my FR, I only get the power off button. Cool!<br>
> I hav a SD card partitioned like this:<br>
> /dev/mmcblk0p1 - vfat, for storage<br>
> /dev/mmcblk0p2 - ext3, QtMoko V22<br>
> /dev/mmcblk0p3 - ext3, QtMoko V23<br>
> /dev/mmcblk0p4 - swap<br>
><br>
> with the SD card inserted, I see no bootmenu - it just boots /dev/mmcblk0p2<br>
> every time.<br>
> What's wrong?<br>
<br>
</div>You forgot to tell Qi not to boot from the SD partitions. See:<br>
<a href="http://wiki.openmoko.org/wiki/Qi#Files" target="_blank">http://wiki.openmoko.org/wiki/Qi#Files</a><br>
<br></blockquote></div>According to the readme[1] on the qi-bootmenu site, it is not necessary to mark the SD paryitions as not bootable:<br>"The patches which are applied are thus not strictly necessary but they have <br>
<pre> a few advantages over vanilla Qi.<br><br> - You won't have to mark your SD-card partition as not bootable via<br> noboot-$MACHINE files"<br></pre>I found out that I could get the boot menu to show up if I did the "AUX press" move, but IMHO, that defeats the puprpose of the boot loader.<br>
I want it to show up automatically, each time I boot my FR.<br><br>References:<br>1) <a href="http://repo.or.cz/w/qi-bootmenu-system.git/blob_plain/HEAD:/README">http://repo.or.cz/w/qi-bootmenu-system.git/blob_plain/HEAD:/README</a><br>
-- <br>Regards, <br>Torfinn Ingolfsen<br>