Nikolaus,<br><br>I agree you should first play with something that is available.<br><br>The information I got is from <a href="http://eurocircuit.com">eurocircuit.com</a>, <br>The price is based on 4 layer 150 * 60 mm; just a wild guess of the size and layers based on standard technology, but giving an indication.<br>
More about the possibilities can be read in <a href="http://www.eurocircuits.com/images/stories/ec09/ec-services-leaflet-uk-english-4-2010-v2.pdf">http://www.eurocircuits.com/images/stories/ec09/ec-services-leaflet-uk-english-4-2010-v2.pdf</a>. I did not check any guidelines and requirements, so hard to say what suits. If somebody could provide more detailed information or point in a direction, a more serious price could be obtained.<br>
<br>Regards,<br>Martijn<br><br><br><br><div class="gmail_quote">2010/5/21 Dr. H. Nikolaus Schaller <span dir="ltr">&lt;<a href="mailto:hns@goldelico.com">hns@goldelico.com</a>&gt;</span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div style="word-wrap: break-word;">Yes,<div>this all can be considered for a future version.</div><div><br></div><div>What we wanted to start with is something that just works, is easily available, can be used for experimenting and software development and is not too costly. A nice case, a new PCB for the OMAP processor or using the Gumstix makes things much more expensive.</div>
<div><br></div><div>@Yocto: what has to be considered is that the Gumstix does not fit into a Freerunner case (it is still too large/thick). </div><div><br></div><div>@ Martijn: the OMAP BGA poses high level requirements for a new PCB. So I would be surprised if one can really get such PCBs for 15 € @ 50 units. But do you have more information? What have been your assumptions about # of layers, min. drill size, min. width etc.?</div>
<div><br></div><div><br></div><div>Nikolaus</div><div><br></div><div><br><div><br><div><div>Am 21.05.2010 um 15:48 schrieb Yocto:</div><div><div></div><div class="h5"><br><blockquote type="cite"><span style="border-collapse: separate; color: rgb(0, 0, 0); font-family: Helvetica; font-size: medium; font-style: normal; font-variant: normal; font-weight: normal; letter-spacing: normal; line-height: normal; text-indent: 0px; text-transform: none; white-space: normal; word-spacing: 0px;"><div bgcolor="#ffffff">
<div><font face="Arial" size="2">&gt;<span> </span><font face="Times New Roman" size="3">I haven&#39;t seen a discussion about redesign of the board, the design files (schematics in Orcad) are available, so you can downsize the connectors used and fit it in an existing casing.</font></font></div>
<div><font face="Arial" size="2"></font> </div><div><font face="Arial" size="2">Could we, also, consider the option of using a &quot;smaller&quot; board like the Gumstix Overo ?</font></div><div><font face="Arial" size="2"></font> </div>
<div><font face="Arial" size="2">OMAP3503 with ARM Cortex-A8 at 600MHz</font></div><div><font face="Arial" size="2">256MB RAM / 256MB Flash</font></div><div><font face="Arial" size="2">[ 17mm x 58mm x 4.2mm ].</font></div>
<div><font face="Arial" size="2"><a href="http://www.gumstix.com" target="_blank">http://www.gumstix.com</a></font></div><div><font face="Arial" size="2"></font> </div><div><font face="Arial" size="2">Regards,</font></div>
<div><font face="Arial" size="2">// Yocto</font></div><blockquote style="border-left: 2px solid rgb(0, 0, 0); padding-left: 5px; padding-right: 0px; margin-left: 5px; margin-right: 0px;"><div>----- Original Message -----</div>
<div style="background-color: rgb(228, 228, 228);"><b>From:</b><span> </span><a title="marvad.one@gmail.com" href="mailto:marvad.one@gmail.com" target="_blank">Martijn van Dongen</a></div><div><b>To:</b><span> </span><a title="community@lists.openmoko.org" href="mailto:community@lists.openmoko.org" target="_blank">List for Openmoko community discussion</a></div>
<div><b>Sent:</b><span> </span>Thursday, May 20, 2010 5:00 PM</div><div><b>Subject:</b><span> </span>Re: Openmoko Beagle Hybrid</div><div><br></div>Hi,<br>First of all: nice project, could be a nice follow up for the freerunner.<br>
<br>I have been looking at the discussions a little bit. Main discussion is how to make a new casing that fits around the beagle board, how to produce and what it costs.<br>I haven&#39;t seen a discussion about redesign of the board, the design files (schematics in Orcad) are available, so you can downsize the connectors used and fit it in an existing casing. I have a price of a PCB (without parts) at low volumes (50 pieces) at less than €15.<br>
Assembly of low quantitiy boards will be very expensive (make it double the components price), so a DIY project for assembly of the boards will make the PCB fit for a reasonable price.<br><br>Regards,<br>Martijn<br><br><br>
<div class="gmail_quote">2010/5/11 Dr. H. Nikolaus Schaller<span> </span><span dir="ltr">&lt;<a href="mailto:hns@computer.org" target="_blank">hns@computer.org</a>&gt;</span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
There is now a new Wiki page for the project:<br><br>       <a href="http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid" target="_blank">http://wiki.openmoko.org/wiki/Openmoko_Beagle_Hybrid</a><br><br>I have received some questions why we did not put all this into a nice<br>
design. The main reason is that we can&#39;t redesign the Beagleboard (it<br>has fixed dimensions) and we can&#39;t afford to build plastic injection<br>moulds (if someone has an idea how to reduce cost this is very<br>welcome). So the easiest solution was to combine what we have: a given<br>
Beagleboard and the Freerunner case.<br><br>Other questions were what one could do with this. Here some ideas (not<br>assuming it is complete - you may have more and it is a platform for<br>your creativity):<br><br>       • experimenting with touchscreen and new user interfaces on Beagleboard<br>
       • learn how the OMAP3530 CPU works<br>       • make it a truly open mobile application development platform by<br>adding a battery pack and a UMTS usb stick<br>       • investigate how an Openmoko with UMTS and OMAP3530 feels (not from<br>
haptics but screen operation and UMTS speed)<br>       • porting SHR, QtMoko, Android, etc. to ARM-Cortex A8<br><br>And here some feature list:<br><br>       • PCB that fits into Freerunner case (top cover and middle part after<br>
cutting a hole)<br>       • works also without such a case (except speakers and earset)<br>       • Toppoly LCM interface (same display as used in the Freerunner -<br>otherwise it would not fit into the case)<br>       • TSC2007 touch screen controller<br>
       • Microphone<br>       • Earset and Speaker connector (for those sitting in the Freerunner<br>case)<br>       • 2 buttons (AUX and Power)<br>       • 2 dual color LEDs (in the AUX and Power buttons)<br>       • vibracall driver<br>
       • headset jack to connect microphone, earset and speaker<br><br>For the software, we have to rearrange the code on our server a little<br>and then it will be made public.<br><br>Finally, here you can do preorders:<br>
<br>       <a href="http://www.handheld-linux.com/wiki.php?page=Openmoko%20Beagle" target="_blank">http://www.handheld-linux.com/wiki.php?page=Openmoko%20Beagle</a><br><br>Nikolaus<br>_______________________________________________<br>
Openmoko community mailing list<br><a href="mailto:community@lists.openmoko.org" target="_blank">community@lists.openmoko.org</a><br><a href="http://lists.openmoko.org/mailman/listinfo/community" target="_blank">http://lists.openmoko.org/mailman/listinfo/community</a><br>
</blockquote></div><br><div><br></div><hr><div><br></div>_______________________________________________<br>Openmoko community mailing list<br><a href="mailto:community@lists.openmoko.org" target="_blank">community@lists.openmoko.org</a><br>
<a href="http://lists.openmoko.org/mailman/listinfo/community" target="_blank">http://lists.openmoko.org/mailman/listinfo/community</a><br></blockquote>_______________________________________________<br>Openmoko community mailing list<br>
<a href="mailto:community@lists.openmoko.org" target="_blank">community@lists.openmoko.org</a><br><a href="http://lists.openmoko.org/mailman/listinfo/community" target="_blank">http://lists.openmoko.org/mailman/listinfo/community</a><br>
</div></span></blockquote></div></div></div><br></div></div></div><br>_______________________________________________<br>
Openmoko community mailing list<br>
<a href="mailto:community@lists.openmoko.org">community@lists.openmoko.org</a><br>
<a href="http://lists.openmoko.org/mailman/listinfo/community" target="_blank">http://lists.openmoko.org/mailman/listinfo/community</a><br>
<br></blockquote></div><br>