Android image and some instructions

Andreas Wallin thesaint at
Fri Dec 5 08:56:22 CET 2008

Could you describe this in more detail,

Where do i type these commands ?

Andy Green wrote:
> Somebody in the thread at some point said:
> | Latest uImage-android seems to be broken - uboot gives Bad data CRC
> | message with it.
> | Can anybody post some older uImage-android ?
> No this is caused by U-Boot's default environment only pulling in 2MB
> from the NAND partition for kernel.  Increase it like this ->
> setenv bootcmd setenv bootargs \${bootargs_base} \${mtdparts}\; nand
> read.e 0x32000000 kernel 0x300000\; bootm 0x32000000
> saveenv
> -Andy

devel mailing list
devel at

More information about the devel mailing list