[FSO] add QCT msm7* modem support
Michael 'Mickey' Lauer
mickey at openmoko.org
Mon Nov 24 00:27:35 CET 2008
Didn't see that this mail didn't arrive yet:
Am Saturday 22 November 2008 18:53:16 schrieb Lukas Gorris:
> Hello,
>
> Of course the thing with the list was pebcam. I registered with
> gmail.com domain but sent with googlemail.com.
>
> ###### Original mail which did not go to the list yet is following
>
> Hi,
>
> Everyone feel free to add infos here. I will do as
>
> > well over the next days:
> > http://www.freesmartphone.org/index.php/HW_Platforms
>
> I will update the msm section there.
>
> >> msm7200 devices (for gsm networks): (htc-msm branch)
> >> kaiser (aka HTC TyTn II; buildable machine type in OE), polaris (aka
> >> HTC Touch Cruise; also in OE), nike, neon, sedna, wings, ...
> >
> > Are there plans to have machine support for more devices in OE?
>
> I will sit down and add some more. atm there are only kaiser and
> polaris with msm7200 chipset. I'll try adding everything we have a
> machine type and working git for. The older htc machines could use
> some updating I think.
>
> >> msm7500 devices (for cdma networks): (htc-vogue branch)
> >> vogue (aka HTC Touch), titan (Sprint Mogul), ...
> >
> > So far we don't have any devices with cdma on our agenda. This is not
> > very likely driven by us as we live in GSM countries. Not sure what
> > mickeys opinion is on this, but if anybody would came up with clean
> > support for CDMA in FSO we could discuss this.
>
> I see no problem about no OM devs living in CDMA countries. I will
> talk to people who have the devices and live in cdma areas.
Interesting. I don't know anything serious about CDMA. Do they use an AT
protocol between TA and ME at all?
> 12:46:51 Tx: AT+CLCC\r //List current calls
>
> 12:46:51 Rx: 0\r
>
> 12:46:54 Tx: AT+COPS=2\r //Operator selection; 2: sign off network
>
> 12:46:54 Rx: +CREG: 2\r\n //Network registration; 2: enable
> network registration and location information
>
> 12:46:54 Rx: +CGREG: 2\r\n //Network registration; 2: enable
> network registration and location information
>
> 12:46:55 Rx: 0\r
>
> 12:46:55 Tx: AT+CGAATT=2,1,1\r //GPRS Attach/Detach Mode
>
> 12:46:55 Rx: 0\r
>
> 12:46:55 Tx: AT+COPS=0\r //Operator selection; 0: automatic (oper
> ignored)
>
> 12:47:4 Rx: +CREG: 1,"xxxx","xxxx"\r\n //Network registration; 1:
> enable network registration
>
> 12:47:4 Rx: 0\r
>
> 12:47:4 Tx: AT+COPS=0\r //Operator selection; 0: automatic (oper
> ignored)
>
> 12:47:4 Rx: 0\r
>
> 12:47:4 Rx: @HTCCSQ: 2\r\n //prop. HTC Signal Quality
>
> 12:47:4 Tx: AT+COPS=0\r //Operator selection; 0: automatic (oper
> ignored)
>
> 12:47:4 Rx: 0\r
>
> 12:47:4 Tx: AT+COPS=0\r //Operator selection; 0: automatic (oper
> ignored)
>
> 12:47:4 Rx: 0\r
>
> 12:47:4 Tx: AT+COPS=0\r //Operator selection; 0: automatic (oper
> ignored)
>
> 12:47:4 Rx: 0\r
>
> 12:47:4 Tx: AT+CSQ\r //Signal quality
>
> 12:47:4 Rx: +CSQ: 12,99\r\n0\r //Signal quality
>
> 12:47:4 Tx: AT+COPS=3,2;+COPS?\r //Operator selection; 3: set
> format only, 2: sign off network
>
> 12:47:4 Rx: @HTCCSQ: 2\r\n //Signal quality
>
> 12:47:4 Rx: +COPS: 0,2,"xxxxx",0\r\n0\r //Operator selection; 0:
> automatic (oper ignored), 2: sign off network
>
> 12:47:4 Tx: AT+CIMI\r //International Mobile Subscriber Identifier
>
> 12:47:4 Rx: xxxxxxxxxxxxxxx\r\n0\r //International Mobile
> Subscriber Identifier
>
> 12:47:6 Rx: @HTCCSQ: 4\r\n //prop. HTC Signal Quality
>
> 12:47:12 Rx: +CGREG: 1\r\n //Network registration; 1: enable
> network registration
>
> 12:47:17 Tx: AT at SYSTEMTIME=12,47,17,2008,11,22\r
>
> 12:47:17 Rx: 0\r
Not surprising [which is good]. If we have all of the proprietary commands
documented, we'll be up to speed wrt. ogsmd quickly.
--
:M:
More information about the devel
mailing list