building FSO: xserver-kdrive error

[Olivier Fauchon]

Same problem here. It seems this is caused by :

moko-fso/openembedded/conf/machine/om-gta02.conf   :: XSERVER = 
"xserver-kdrive-glamo xserver-kdrive-fbdev"

I'm not sure if it's good , but commenting this line make the build 
successful.

Hope that helps


Previdi Roberto wrote:
> Hello, i am trying to build the fso image from the makefile following 
> the wiki at http://wiki.openmoko.org/wiki/Building_FSO.
> After 1 disk full, 1 glibc-locale-related problem and 2 days of 
> compilations i finally worked out to reach "task 5128 of 5133"!
> But now i have a apparently undocumented problem: when it comes to the 
> do_rootfs task it prints out this error:
>
> /roby at roby-laptop ~/openmoko/fso-makefile/fso-testing-image $ make image
> . conf/topdir.conf && test "`pwd`" = "$TOPDIR" || echo 
> "TOPDIR='`pwd`'" > conf/topdir.conf
> . ./setup-env; exec bitbake "fso-image"
> NOTE: Handling BitBake files: \ (5774/5774) [100 %]
> NOTE: Parsing finished. 5519 cached, 0 parsed, 255 skipped, 0 masked.
> NOTE: build 200809211544: started
>
> OE Build Configuration:
> BB_VERSION        = "1.8.10"
> METADATA_BRANCH   = "<unknown>"
> METADATA_REVISION = "<unknown>"
> TARGET_ARCH       = "arm"
> TARGET_OS         = "linux-gnueabi"
> MACHINE           = "om-gta02"
> DISTRO            = "openmoko"
> DISTRO_VERSION    = "-20080921"
> TARGET_FPU        = "soft"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: preferred version 0.2 of starling not available (for item starling)
> NOTE: Preparing runqueue
> ERROR: Multiple .bb files are due to be built which each provide 
> virtual/xserver 
> (/home/roby/openmoko/fso-makefile/fso-testing-image/openembedded/packages/xorg-xserver/xserver-kdrive-glamo_1.3.0.0+git.bb 
> <http://git.bb> 
> /home/roby/openmoko/fso-makefile/fso-testing-image/openembedded/packages/xorg-xserver/xserver-kdrive_1.3.0.0.bb 
> <http://xserver-kdrive_1.3.0.0.bb>).
>  This usually means one provides something the other doesn't and should.
> NOTE: Executing runqueue
> NOTE: Running task 5128 of 5133 (ID: 4, 
> /home/roby/openmoko/fso-makefile/fso-testing-image/openembedded/packages/images/fso-image.bb 
> <http://fso-image.bb>, do_rootfs)
> NOTE: package fso-image-1.0: started
> NOTE: package fso-image-1.0-r0: task do_rootfs: started
> ERROR: function do_rootfs failed
> ERROR: see log in 
> /home/roby/openmoko/fso-makefile/fso-testing-image/tmp/work/om-gta02-angstrom-linux-gnueabi/fso-image-1.0-r0/temp/log.do_rootfs.21592
> NOTE: Task failed: 
> /home/roby/openmoko/fso-makefile/fso-testing-image/tmp/work/om-gta02-angstrom-linux-gnueabi/fso-image-1.0-r0/temp/log.do_rootfs.21592
> NOTE: package fso-image-1.0-r0: task do_rootfs: failed
> ERROR: TaskFailed event exception, aborting
> NOTE: package fso-image-1.0: failed
> ERROR: Build of 
> /home/roby/openmoko/fso-makefile/fso-testing-image/openembedded/packages/images/fso-image.bb 
> <http://fso-image.bb> do_rootfs failed
> ERROR: Task 4 
> (/home/roby/openmoko/fso-makefile/fso-testing-image/openembedded/packages/images/fso-image.bb 
> <http://fso-image.bb>, do_rootfs) failed
> NOTE: Tasks Summary: Attempted 5129 tasks of which 5129 didn't need to 
> be rerun and 1 failed.
> ERROR: 
> '/home/roby/openmoko/fso-makefile/fso-testing-image/openembedded/packages/images/fso-image.bb 
> <http://fso-image.bb>' failed
> make: *** [image] Error 1
> roby at roby-laptop ~/openmoko/fso-makefile/fso-testing-image $
>
> /the relevant part in the log file is this:
>
> /+ mkdir -p ./etc/gtk-2.0/
> + echo 'gtk-font-name = "Sans 5"'
> + ln -s libc.so.6 ./lib/libc.so
> + cd /home/roby/openmoko/fso-makefile/fso-testing-image
> + log_check rootfs
> + set +x
> log_check: Using 
> /home/roby/openmoko/fso-makefile/fso-testing-image/tmp/work/om-gta02-angstrom-linux-gnueabi/fso-image-1.0-r0/temp/log.do_rootfs.21592 
> as logfile
> log_check: There were error messages in the logfile
> log_check: Matched keyword: [ERR]
> Downloading 
> file:/home/roby/openmoko/fso-makefile/fso-testing-image/tmp/deploy/glibc/ipk/armv4t/libgcrypt11_1.4.0-r3_armv4t.ipk
> Installing libgpg-error0 (1.4-r1) to root...
> Downloading 
> file:/home/roby/openmoko/fso-makefile/fso-testing-image/tmp/deploy/glibc/ipk/armv4t/libgpg-error0_1.4-r1_armv4t.ipk
> 4t/libdaemon0_0.12-r0_armv4t.ipk
> --
> Downloading 
> file:/home/roby/openmoko/fso-makefile/fso-testing-image/tmp/deploy/glibc/ipk/armv4t/libgcrypt11_1.4.0-r3_armv4t.ipk
> Installing libgpg-error0 (1.4-r1) to root...
> Downloading 
> file:/home/roby/openmoko/fso-makefile/fso-testing-image/tmp/deploy/glibc/ipk/armv4t/libgpg-error0_1.4-r1_armv4t.ipk
> Installing libgpgme11 (1.1.4-r4) to root...
> --
> (offline root mode: not running libgpewidget1.postinst)
> Configuring libgpg-error0
> (offline root mode: not running libgpg-error0.postinst)
> Configuring libgpgme11
> --
> Configuring zhone
> Collected errors:
>  * ERROR: Cannot satisfy the following dependencies for 
> xserver-kdrive-glamo:
>          *  xserver-kdrive *
> --
> + for i in 
> '/home/roby/openmoko/fso-makefile/fso-testing-image/tmp/rootfs/usr/lib/opkg/info/*.postinst'
> + '[' -f 
> /home/roby/openmoko/fso-makefile/fso-testing-image/tmp/rootfs/usr/lib/opkg/info/libgpg-error0.postinst 
> ']'
> + sh 
> /home/roby/openmoko/fso-makefile/fso-testing-image/tmp/rootfs/usr/lib/opkg/info/libgpg-error0.postinst 
> configure
> + for i in 
> '/home/roby/openmoko/fso-makefile/fso-testing-image/tmp/rootfs/usr/lib/opkg/info/*.postinst'
>
> /Has anyone faced the same errors? this is my local.conf, if it can 
> affect the result:
>
> /PARALLEL_MAKE = "-j 4"
> BB_NUMBER_THREADS = "4"
> GLIBC_GENERATE_LOCALES = "en_US.UTF-8 it_IT.UTF-8"/
>
> Thank you, bye.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> devel mailing list
> devel at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/devel
>   


-- 
Olivier Fauchon
Freelance System-Network Admin
Phone: +33 610 493 763
http://www.aixmarseille.com