Problem with USB camera drivers

[Walter Christie]

Hi all,

Trying to get uvc cameras working with the freerunner... get this error when plugging in a quickcam 5000:

usb 1.2-3: can't set config #1, error -62

Here's what I have for dmesg | grep usb:

usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbmon: debugfs is not available
usbcore: registered new interface driver libusual
s3c2410: changing usb to host
usb 1-2: new full speed USB device using s3c2410-ohci and address 9
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2.1: new low speed USB device using s3c2410-ohci and address 10
usb 1-2.1: configuration #1 chosen from 1 choice
input: DELL DELL USB Keyboard as /devices/platform/s3c2410-ohci/usb1/1-2/1-2.1/1-2.1:1.0/input/input7
input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-s3c24xx-2.1
usb 1-2.3: new full speed USB device using s3c2410-ohci and address 11
usb 1-2.3: device descriptor read/64, error -62
usb 1-2.3: configuration #1 chosen from 1 choice
usb 1-2.3: can't set config #1, error -62
usb 1-2.3: USB disconnect, address 11
usb 1-2.3: new full speed USB device using s3c2410-ohci and address 12
usb 1-2.3: configuration #1 chosen from 1 choice
usb 1-2.3: can't set config #1, error -62
s3c2410: changing usb to device
usb 1-2: USB disconnect, address 9
usb 1-2.1: USB disconnect, address 10
usb 1-2.3: USB disconnect, address 12
usb0: no IPv6 routers present
usb0: full speed config #2: 500 mA, Ethernet Gadget, using RNDIS

lsusb gives me (accurately) all the fevices on the bus - using a usb 1.1 hub - so I think the devices are being read. What is this error -62 business, and how do I make it go away?






      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/devel/attachments/20090421/3cf5718a/attachment.htm