paroli package is back

Mirko Lindner mirko at openmoko.com
Tue Feb 17 14:59:31 CET 2009


Hi again,

I spaced out, Angus is also building daily unstable images, which you 
can use as a basis you can find them here:
http://downloads.openmoko.org/distro/unstable/daily/

I installed:
image:
http://downloads.openmoko.org/distro/unstable/daily/om-gta02/20090217/openmoko-fso-image-light-glibc-ipk--20090217-om-gta02.rootfs.jffs2

kernel:
http://downloads.openmoko.org/distro/unstable/daily/om-gta02/20090217/uImage-2.6.28-oe1+gitr34240a1c06ae36180dee695aa25bbae869b2aa26-r3-om-gta02.bin

Unfortunately, neither paroli nor zhone were able to register on a 
network (I tried 2 SIMs, 2 different providers, one with one without PIN).

Apart from this the image would be perfect as everything you need to run 
paroli right away.

In case the image works here are the steps I took:

  - flash image and kernel

  - I removed the zhone autostart
rm /etc/X11/Xsession.d/80zhone

  - update opkg
opkg update

  - install paroli
opkg install paroli

  - launch paroli
on your desktop click the icon named PLauncher

the paroli launcher will appear might ask for your PIN etc.
Once the gray overlay disappeared from the launcher you can start Tele 
and make a call :)

/mirko

Mirko Lindner wrote:
> Hi,
> 
> after some long struggles the paroli package is back.
> 
> There is packages in fso MS5 openmoko unstable (those two are the same) 
> as well as openmoko experimental. The latter should be build from the 
> latest revision. A small manual how to get it:
> 
> Install the following:
> 
> kernel:
> http://downloads.freesmartphone.org/fso-stable/milestone5/om-gta02/uImage-om-gta02-latest.bin
> 
> image:
> http://downloads.freesmartphone.org/fso-stable/milestone5/om-gta02/openmoko-fso-illume-image-glibc-ipk--20090202-om-gta02.rootfs.jffs2
> 
> In order to get the package from experimental you'll need to add a file:
> 
> create a file in the /etc/opkg folder with the content:
> 
> src/gz openmoko-experimental-armv4t 
> http://downloads.openmoko.org/repository/experimental/armv4t
> 
> Then do an opkg-update and opkg install paroli .
> 
> This should get you the newest version.
> 
> Yell if it doesn't work :)
> 
> /mirko
> 
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community



More information about the devel mailing list