Openmoko Bug #2216: Call = there is no sound

[Openmoko Public Trac]

#2216: Call = there is no sound
----------------------+-----------------------------------------------------
 Reporter:  octavsly  |          Owner:  openmoko-devel                
     Type:  defect    |         Status:  new                           
 Priority:  high      |      Milestone:  Om2008.12                     
Component:  unknown   |        Version:  GTA02v6                       
 Severity:  major     |       Keywords:  call, mute, no sound, no audio
 Haspatch:  0         |      Blockedby:                                
Estimated:            |    Patchreview:                                
 Blocking:            |   Reproducible:                                
----------------------+-----------------------------------------------------
 When I initiate a call, and when the call is progressing, I cannot hear
 anything, nor I am heard. I never had this problem before. Adjusting the
 volume via the slide-bar does not change anything.

 I have searched through the tickets but I cannot find anyone having the
 same problem.


 I am using the latest stable Om image.

 I have also attached a logread file (replacing the test phone number with
 "xxxxxxxxxx"



 {{{

 root at om-gta02:/media/card/boot# cat /proc/cpuinfo
 Processor       : ARM920T rev 0 (v4l)
 BogoMIPS        : 199.47
 Features        : swp half thumb
 CPU implementer : 0x41
 CPU architecture: 4T
 CPU variant     : 0x1
 CPU part        : 0x920
 CPU revision    : 0
 Cache type      : write-back
 Cache clean     : cp15 c7 ops
 Cache lockdown  : format A
 Cache format    : Harvard
 I size          : 16384
 I assoc         : 64
 I line length   : 32
 I sets          : 8
 D size          : 16384
 D assoc         : 64
 D line length   : 32
 D sets          : 8

 Hardware        : GTA02
 Revision        : 0360
 Serial          : 0000000000000000
 }}}

-- 
Ticket URL: <https://docs.openmoko.org/trac/ticket/2216>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac