Wifi not working

Peter Kraker peter.kraker at ltfe.org
Tue Mar 10 07:53:22 CET 2009


I'm getting this with every firmware since at least 20090209. Happens 
almost every time you set interface to ad-hoc mode with iwconfig.

Best regards
Peter Kraker

Alon Bar-Lev wrote:
> Update!
>
> I am using git latest, and decided to recompile minimal kernel based
> on the micro configuration,
> Some setting were required in order to make the ar6000 load, and now
> after the wmiconfig
> it actually works!!!!
>
> But now I need to unload/load it after boot as for some strange reason
> the driver
> cannot detect its hardware correctly?!?!
>
> Also, I am gettings these, and device is not available until reboot.
>
> AR6000 disconnected
> neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
> neo1973-pm-bt neo1973-pm-bt.0: __gta02_pm_bt_toggle_radio 0
> mmc1: card 0001 removed
> ar6000_wow interrupt
> s3c2440-sdi s3c2440-sdi: powered down.
> s3c2440-sdi s3c2440-sdi: powered down.
>
> Need to figure out how to make this stable.
>
> Thank you.
> Alon.
>
> On Tue, Mar 10, 2009 at 12:57 AM, Alon Bar-Lev <alon.barlev at gmail.com> wrote:
>   
>> Thank you!
>>
>> No the wmiconfig is not working...
>>
>> Even if I can workaround the issue at my home AP, what will happen in
>> other places...?
>>
>> Does anyone know why the wireless driver is not based on standard
>> kernel wireless interfaces (MAC80211 or IEEE80211)?
>>
>> Alon.
>>
>> On Mon, Mar 9, 2009 at 3:42 AM, Werner Almesberger <werner at openmoko.org> wrote:
>>     
>>> Alon Bar-Lev wrote:
>>>       
>>>>> [1] http://docs.openmoko.org/trac/ticket/1250
>>>>>           
>>> Two things to try:
>>>
>>> 1) Does
>>>   wmiconfig -i eth0 --setlongpreamble 0
>>>   make things work ?
>>>
>>> 2) If DD-WRT lets you enable long preambles, doing this should avoid
>>>   the problem.
>>>
>>> Please let me know if any of this helps. I'm particularly curious
>>> about 1).
>>>
>>> Thanks,
>>> - Werner
>>>
>>>       
>
> _______________________________________________
> devel mailing list
> devel at lists.openmoko.org
> https://lists.openmoko.org/mailman/listinfo/devel
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/devel/attachments/20090310/a38bfe5c/attachment-0001.htm 


More information about the devel mailing list