SHR - testing, stable and unstable - problem with Intone/earphones

Philip Rhoades phil at pricom.com.au
Tue Nov 2 21:09:54 CET 2010


Paul,


On 2010-11-03 06:57, Paul Fertser wrote:
> On Wed, Nov 03, 2010 at 06:55:22AM +1100, Philip Rhoades wrote:
>> On 2010-11-02 19:35, Paul Fertser wrote:
>>> Philip Rhoades<phil at pricom.com.au>   writes:
>>>> I worked out what it was - the plug is very sensitive to position - it
>>>> should NOT be pushed all the way in, otherwise you get mono and I was
>>>> only listening in one earpiece!
>>>
>>> You're using a wrong 2.5mm<->   3.5mm adapter, check the pinout at the
>>> wiki.
>>
>> Thanks for the note but how could the pinouts be wrong? - if the plug is
>> not pushed all the way in (there is about a 2mm gap) I get stereo fine
>> so the pinouts should be fine?
>
> Typical symptom of wrong pinout. Have you _actually_ checked it?


I just had a look at:

	http://wiki.openmoko.org/wiki/Headset

- I see what you mean - thanks for that!

Regards,

Phil.
-- 
Philip Rhoades

GPO Box 3411
Sydney NSW	2001
Australia
E-mail:  phil at pricom.com.au



More information about the devel mailing list