[PATCH] main: Print interface information after it has been filled in

[Stefan Schmidt]

Hello.

On Tue, 2011-05-24 at 11:05, Tormod Volden wrote:
> On Mon, May 23, 2011 at 8:17 PM, Stefan Schmidt wrote:
> >> Sadly a problem on the freerunner persists in the libusb-1.0 branch
> >> even with this patch applied. Trying to donwload something just dies
> >> without segfault and leaves the following in dmesg:
> >>
> >> [1285088.771326] dfu-util[18547] general protection ip:4027f6 sp:7fffc6d2a610 error:0 in dfu-util[400000+6000]
> >>
> >> I know you don't have an freerunner so I will try to chase this down
> >> the next days. Its the last blocker for getting the libusb-1.0 branch
> >> merged into master.
> >
> > I spent some time on this at the weekend. It actually did work before
> > in the libusb-1.0 branch. Your commit that fixed your device broke it
> > for the freerunner:
> >
> > commit 6329fc0886049e0eb50c51e88b7fc52f056b83d4
> > Author: Tormod Volden <debian.tormod at gmail.com>
> > Date:   Thu Feb 3 23:12:35 2011 +0100
> >
> >    main: Use the config descriptor value, not the index
> >
> > Its libusb_get_config_descriptor_by_value() in print_dfu_if thats
> > failing and thus the cfg being not populated. As you observed
> > yourself.
> 
> Yes, libusb_get_config_descriptor_by_value() was failing because it is
> called with dfu_if->configuration and dfu_if was not fully populated
> so the "configuration" member was wrong. Before my commit "Use the
> config descriptor value, not the index" this happened to work anyway
> because the uninitialized value (zero) in most cases was correct
> (index 0, the first one). On the other hand, the correct /value/ is
> most of the times 1, so passing 0 will fail. This was fixed by the
> patch in this thread. You still haven't applied it to the libusb-1.0
> branch though. I hope you are always merging in master before you
> build from libusb-1.0?

It was in the branch already I just forgot to push it out. Sorry for
that. Normally I cherry-pick single commits.

regards
Stefan Schmidt