<br><br>Am Dienstag, den 09-06-2009 um 8:27 schrieb "devel-request@lists.openmoko.org" <devel-request@lists.openmoko.org>:<br><blockquote style="border-style: none none none solid; border-color: -moz-use-text-color -moz-use-text-color -moz-use-text-color rgb(34, 67, 127); border-width: 0pt 0pt 0pt 2px; margin: 0px 0px 0px 5px; padding: 0px 0px 0px 5px;">Send devel mailing list submissions to<br>
devel@lists.openmoko.org<br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
https://lists.openmoko.org/mailman/listinfo/devel<br>
or, via email, send a message with subject or body 'help' to<br>
devel-request@lists.openmoko.org<br>
<br>
You can reach the person managing the list at<br>
devel-owner@lists.openmoko.org<br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of devel digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
1. Serial port not working on GTA02 with debug board<br>
(Abhishek Bajpai)<br>
2. Re: Serial port not working on GTA02 with debug board<br>
(Timo Juhani Lindfors)<br>
3. Re: OM translation (Evgeniy Ginzburg)<br>
4. Fwd: Serial port not working on GTA02 with debug board<br>
(Abhishek Bajpai)<br>
5. Re: Serial port not working on GTA02 with debug board<br>
(Abhishek Bajpai)<br>
6. Re: Serial port not working on GTA02 with debug board<br>
(Timo Juhani Lindfors)<br>
7. Re: Serial port not working on GTA02 with debug board<br>
(Abhishek Bajpai)<br>
8. Re: Serial port not working on GTA02 with debug board<br>
(Timo Juhani Lindfors)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Mon, 8 Jun 2009 18:07:22 +0530<br>
From: Abhishek Bajpai <abhisheietk@gmail.com><br>
Subject: Serial port not working on GTA02 with debug board<br>
To: devel@lists.openmoko.org<br>
Message-ID:<br>
<210dead20906080537w3ebc4909nc3a5e65bfb0a564f@mail.gmail.com><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
I want to interface a computers serial port with GTA02 . I connected debug<br>
Board V3 with GTA02 and to my computer.<br>
I set the baud rate to 112500 8N1 of the ttyUSB0 device through minicom. I<br>
installed the minicom on GTA02 also and set its ports accordingly. But On my<br>
computer I am getting some special characters in minicom terminal and no<br>
response in minicom terminal on GTA02. I tried all the serial ports<br>
available on GTA02 ( tty0, tty1, tty2, ttySAC0, ttySAC1, ttySAC2 ) But I am<br>
not getting any response. If the port is aquired by some other program the<br>
minicom should give the error. but it also not giving any error.<br>
<br>
Other thing is I have also observed that minicom terminal on computer starts<br>
responding as soon as I start the GTA02 device. Does it suggest that some<br>
other device is also attached in that port.<br>
<br>
Please help<br>
Thanks and regards<br>
Abhishek Bajpai<br>
<br>
-- <br>
" Even The word Impossible says I M Possible"<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: http://lists.openmoko.org/pipermail/devel/attachments/20090608/43041368/attachment-0001.htm <br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Mon, 08 Jun 2009 15:48:35 +0300<br>
From: Timo Juhani Lindfors <timo.lindfors@iki.fi><br>
Subject: Re: Serial port not working on GTA02 with debug board<br>
To: Abhishek Bajpai <abhisheietk@gmail.com><br>
Cc: devel@lists.openmoko.org<br>
Message-ID: <84my8ic2n0.fsf@sauna.l.org><br>
Content-Type: text/plain; charset=us-ascii<br>
<br>
Abhishek Bajpai <abhisheietk@gmail.com> writes:<br>
> Other thing is I have also observed that minicom terminal on computer starts<br>
> responding as soon as I start the GTA02 device. Does it suggest that some<br>
> other device is also attached in that port.<br>
<br>
What's your kernel command line on gta02? Does ps axuf show getty for ttySAC2?<br>
<br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Mon, 8 Jun 2009 16:58:37 +0400<br>
From: Evgeniy Ginzburg <nad.oby@gmail.com><br>
Subject: Re: OM translation<br>
To: devel@lists.openmoko.org<br>
Message-ID:<br>
<46f27d5a0906080558h3f162b39x7d69919ebc060502@mail.gmail.com><br>
Content-Type: text/plain; charset="utf-8"<br>
<br>
On Sun, Jun 7, 2009 at 1:17 AM, Onen <onen.om@free.fr> wrote:<br>
<br>
> Hi,<br>
><br>
> thanks for proposing your help.<br>
><br>
> openBmap (GPS/GSM cell logger), is currently only running in English. I<br>
> would love to see it translated. Right now, the first step would be to<br>
> modify the python code to use gettext. Then it would simply be a matter<br>
> of translating strings.<br>
><br>
> Let me know if you are interested in any of these.<br>
><br>
> If this was not the kind of apps you had in mind, then sorry for the<br>
> noise ;-)<br>
><br>
> Onen<br>
<br>
<br>
Hi, Onen.<br>
<br>
Just add gettext support, and post link to sourcecode.<br>
There some translators in communoty willing to contribute, myself included.<br>
<br>
Regards, Evgeniy.<br>
<br>
<br>
<br>
-- <br>
So long, and thanks for all the fish.<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: http://lists.openmoko.org/pipermail/devel/attachments/20090608/fbd85914/attachment-0001.htm <br>
<br>
------------------------------<br>
<br>
Message: 4<br>
Date: Mon, 8 Jun 2009 20:37:18 +0530<br>
From: Abhishek Bajpai <abhisheietk@gmail.com><br>
Subject: Fwd: Serial port not working on GTA02 with debug board<br>
To: devel@lists.openmoko.org<br>
Message-ID:<br>
<210dead20906080807q38efc43cib87269eb05086bd6@mail.gmail.com><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
---------- Forwarded message ----------<br>
From: Abhishek Bajpai <abhisheietk@gmail.com><br>
Date: 2009/6/8<br>
Subject: Re: Serial port not working on GTA02 with debug board<br>
To: Timo Juhani Lindfors <timo.lindfors@iki.fi><br>
<br>
<br>
<br>
<br>
2009/6/8 Timo Juhani Lindfors <timo.lindfors@iki.fi><br>
<br>
> Abhishek Bajpai <abhisheietk@gmail.com> writes:<br>
> > Other thing is I have also observed that minicom terminal on computer<br>
> starts<br>
> > responding as soon as I start the GTA02 device. Does it suggest that<br>
> some<br>
> > other device is also attached in that port.<br>
><br>
> What's your kernel command line on gta02? Does ps axuf show getty for<br>
> ttySAC2?<br>
> I am using ssh for command line. Yes it shows getty for ttySAC2. But now I<br>
> have disabled the getty program by moving it to another folder. Now also I<br>
> am getting the same problem......<br>
><br>
<br>
<br>
<br>
-- <br>
" Even The word Impossible says I M Possible"<br>
<br>
<br>
<br>
-- <br>
" Even The word Impossible says I M Possible"<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: http://lists.openmoko.org/pipermail/devel/attachments/20090608/e427b932/attachment-0001.htm <br>
<br>
------------------------------<br>
<br>
Message: 5<br>
Date: Tue, 9 Jun 2009 11:23:29 +0530<br>
From: Abhishek Bajpai <abhisheietk@gmail.com><br>
Subject: Re: Serial port not working on GTA02 with debug board<br>
To: Timo Juhani Lindfors <timo.lindfors@iki.fi><br>
Cc: devel@lists.openmoko.org<br>
Message-ID:<br>
<210dead20906082253v3cf86ebhbfa19ca3287d6fc4@mail.gmail.com><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
2009/6/8 Abhishek Bajpai <abhisheietk@gmail.com><br>
<br>
><br>
><br>
> 2009/6/8 Timo Juhani Lindfors <timo.lindfors@iki.fi><br>
><br>
>> Abhishek Bajpai <abhisheietk@gmail.com> writes:<br>
>> > Other thing is I have also observed that minicom terminal on computer<br>
>> starts<br>
>> > responding as soon as I start the GTA02 device. Does it suggest that<br>
>> some<br>
>> > other device is also attached in that port.<br>
>><br>
>> What's your kernel command line on gta02? Does ps axuf show getty for<br>
>> ttySAC2?<br>
>> I am using ssh for command line. Yes it shows getty for ttySAC2. But now I<br>
>> have disabled the getty program by moving it to another folder. Now also I<br>
>> am getting the same problem......<br>
>><br>
> Thanks Timo I desabled getty by moving it to another folder. And now I am<br>
> able to get characters on GTA02 minicom from computers minicom.<br>
><br>
but now I am facing new problem :(<br>
while typing on computers minicom I am getting special characters in<br>
response on computers minicom but while typing on GTA02 minicom I am not<br>
getting any response on computers minicom.<br>
I think it become littile confusing let me explain through a diagram<br>
<br>
input from computer>minicom -----> getting response on GTA02>minicom<br>
------>getting special characters on computer>minicom<br>
<br>
input from GTA02>minicom -----> not getting any response on computer>minicom<br>
<br>
<br>
><br>
><br>
> --<br>
> " Even The word Impossible says I M Possible"<br>
><br>
<br>
<br>
<br>
-- <br>
" Even The word Impossible says I M Possible"<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: http://lists.openmoko.org/pipermail/devel/attachments/20090609/867ffcfb/attachment-0001.htm <br>
<br>
------------------------------<br>
<br>
Message: 6<br>
Date: Tue, 09 Jun 2009 09:07:06 +0300<br>
From: Timo Juhani Lindfors <timo.lindfors@iki.fi><br>
Subject: Re: Serial port not working on GTA02 with debug board<br>
To: Abhishek Bajpai <abhisheietk@gmail.com><br>
Cc: devel@lists.openmoko.org<br>
Message-ID: <847hzmaqk5.fsf@sauna.l.org><br>
Content-Type: text/plain; charset=us-ascii<br>
<br>
Abhishek Bajpai <abhisheietk@gmail.com> writes:<br>
> while typing on computers minicom I am getting special characters in<br>
> response on computers minicom but while typing on GTA02 minicom I am not<br>
<br>
Sounds like wrong baudrate. Please first make sure you can talk with getty.<br>
<br>
<br>
<br>
<br>
------------------------------<br>
<br>
Message: 7<br>
Date: Tue, 9 Jun 2009 11:47:43 +0530<br>
From: Abhishek Bajpai <abhisheietk@gmail.com><br>
Subject: Re: Serial port not working on GTA02 with debug board<br>
To: Timo Juhani Lindfors <timo.lindfors@iki.fi><br>
Cc: devel@lists.openmoko.org<br>
Message-ID:<br>
<210dead20906082317u5c46a6x2acf835554a78a61@mail.gmail.com><br>
Content-Type: text/plain; charset="iso-8859-1"<br>
<br>
2009/6/9 Timo Juhani Lindfors <timo.lindfors@iki.fi><br>
<br>
> Abhishek Bajpai <abhisheietk@gmail.com> writes:<br>
> > while typing on computers minicom I am getting special characters in<br>
> > response on computers minicom but while typing on GTA02 minicom I am not<br>
><br>
> Sounds like wrong baudrate. Please first make sure you can talk with getty.<br>
><br>
but I am not using getty instead I am using minicom with same baudrate.<br>
<br>
<br>
<br>
-- <br>
" Even The word Impossible says I M Possible"<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: http://lists.openmoko.org/pipermail/devel/attachments/20090609/cc0743f5/attachment-0001.htm <br>
<br>
------------------------------<br>
<br>
Message: 8<br>
Date: Tue, 09 Jun 2009 09:24:31 +0300<br>
From: Timo Juhani Lindfors <timo.lindfors@iki.fi><br>
Subject: Re: Serial port not working on GTA02 with debug board<br>
To: Abhishek Bajpai <abhisheietk@gmail.com><br>
Cc: devel@lists.openmoko.org<br>
Message-ID: <84y6s1apr4.fsf@sauna.l.org><br>
Content-Type: text/plain; charset=us-ascii<br>
<br>
Abhishek Bajpai <abhisheietk@gmail.com> writes:<br>
> but I am not using getty instead I am using minicom with same baudrate.<br>
<br>
Did you check if the terminal settings are exactly same (stty -F /dev/ttySAC2 -a)?<br>
<br>
<br>
<br>
<br>
------------------------------<br>
<br>
_______________________________________________<br>
devel mailing list<br>
devel@lists.openmoko.org<br>
https://lists.openmoko.org/mailman/listinfo/devel<br>
<br>
<br>
End of devel Digest, Vol 12, Issue 6<br>
************************************</blockquote>