Help with DFU Mode (P1 Device)

[Edward Moss]

Worked as advertised for me:

ifconfig usb0 192.168.0.200 netmask 255.255.255.0
ssh root at 192.168.0.202
[just hit enter when prompted for a password]




On 7/31/07, andrej w. <awu.moko at gmail.com> wrote:
> Hi,
>
> i think it is irrelevant when to fire up the dfu-util, as long as you
> changed the state of the
> console input (that is "Set console to USB"), right?
> Did anybody managed to gain remote ssh access to the unit? I am
> constantly getting "connection refused"
> errors, while trying. Btw. I have used yesterdays rootfs and kernel
> images (2007_07_30).
>
> awu
>
> Peter Trapp schrieb:
> > On Monday 30 July 2007 01:19, Bobby Edmonds wrote:
> >
> >> I cannot get my unit into DFU Mode.
> >>
> >> When I get the boot menu if I do a "dfu-util -l" I get the following
> >> (Runtime Mode):
> >>
> >> dfu-util - (C) 2007 by OpenMoko Inc.
> >> This program is Free Software and has ABSOLUTELY NO WARRANTY
> >>
> >> Found DFU Runtime: [0x1457:0x5119] devnum=18, cfg=0, intf=2, alt=0,
> >> name="USB Device Firmware Upgrade"
> >>
> >> If I select "Set console to USB" it briefly displays another screen that
> >> says "Press [AUX] to return to boot menu" and then rolls back to the
> >> boot menu.
> >>
> >>
> >
> > I guess you've already done it, so for all others...
> >
> > I figured out the same :) My workaround is quite easy.
> >
> > 1) prepare everything at the host side (including the ./dfu-util )
> > 2) "Set console to USB" and press "power"
> > 3) asap Neo changes to "Press [AUX] to return to boot menu" fire the dfu-util
> > command on host side
> >
> > Note: Neo switches back to the "boot-menu" but as long as the host doesn't
> > tell you anything different it should work :)
> >
> > -homyx
> >
> >
> >
>
>
>