Help with DFU Mode (P1 Device)

[Johan Prinsloo]

I flashed with the latest images from the alternative site (chooseopen.com).
I had to change the root password on the device and use that to ssh with.
It worked as advertised with that exception.

Johan

-----Original Message-----
From: device-owners-bounces at lists.openmoko.org
[mailto:device-owners-bounces at lists.openmoko.org] On Behalf Of andrej w.
Sent: Tuesday, July 31, 2007 11:43 AM
To: openmoko at genial.ms
Cc: device-owners at lists.openmoko.org
Subject: Re: Help with DFU Mode (P1 Device)

Hi,

i think it is irrelevant when to fire up the dfu-util, as long as you 
changed the state of the
console input (that is "Set console to USB"), right?
Did anybody managed to gain remote ssh access to the unit? I am 
constantly getting "connection refused"
errors, while trying. Btw. I have used yesterdays rootfs and kernel 
images (2007_07_30).

awu

Peter Trapp schrieb:
> On Monday 30 July 2007 01:19, Bobby Edmonds wrote:
>   
>> I cannot get my unit into DFU Mode.
>>
>> When I get the boot menu if I do a "dfu-util -l" I get the following
>> (Runtime Mode):
>>
>> dfu-util - (C) 2007 by OpenMoko Inc.
>> This program is Free Software and has ABSOLUTELY NO WARRANTY
>>
>> Found DFU Runtime: [0x1457:0x5119] devnum=18, cfg=0, intf=2, alt=0,
>> name="USB Device Firmware Upgrade"
>>
>> If I select "Set console to USB" it briefly displays another screen that
>> says "Press [AUX] to return to boot menu" and then rolls back to the
>> boot menu.
>>
>>     
>
> I guess you've already done it, so for all others...
>
> I figured out the same :) My workaround is quite easy.
>
> 1) prepare everything at the host side (including the ./dfu-util )
> 2) "Set console to USB" and press "power"
> 3) asap Neo changes to "Press [AUX] to return to boot menu" fire the
dfu-util 
> command on host side
>
> Note: Neo switches back to the "boot-menu" but as long as the host doesn't

> tell you anything different it should work :)
>
> -homyx
>
>
>