2 questions
Philippe MONROUX
phi2-monroux at wanadoo.fr
Thu Nov 29 07:52:26 CET 2007
Bonjour,
Krzysztof Kajkowski <cayco at poczta.cayco.pl> a écrit :
>
> Wiadomo=B6=E6 napisana w dniu Nov 28, 2007, o godz 2:12 PM, przez =
> Philippe =20
> MONROUX:
>
> >Bonjour,
> >
> >
> >BUT WHEN I BOOT FROM UBOOT HERE THE RESULT :
> >
> >http://pagesperso-orange.fr/zygomaths/images/IMG_2644.JPG
>
> Did you nand erase kernel and rootfs before flashing?
I have flashed (kernel + rootfs (~ 13 min for the rootfs)) one more
time. And I get the same bad result :
I can't boot from <<power button only>> nor by <<uboot+boot>> (in this case I
obtain http://pagesperso-orange.fr/zygomaths/images/IMG_2644.JPG ) .
I can only boot by <<uboot+Factory reset>>.
So I think I have to <<cu -l /dev/ttyACM0>> (1) or <<minicom>> (2)
(1) The problem is that cu don't work properly. I get
root $> cu -l /dev/ttyACM0
Connected.
but no cu prompt. And I can't enter the "nand erase clean rootfs or
kernel" command (I can enter ~ the prompt appear and . to disconnect
but it is unpredictable and uncertain).
(2) And I'm not a specialist of minicom. When I run it with the
following /etc/minicom/minirc.dfl
pu port /dev/ttyACM0
pu baudrate 115200
pu bits 8
pu parity N
pu stopbits 1
pu minit
pu mreset
pu mhangup
pu updir /home/phi/soekris
pu downdir /home/phi/soekris
pu scriptdir /home/phi/soekris
pu rtscts No
I get that :
http://pagesperso-orange.fr/zygomaths/images/Sans%20titre-2.jpg
Really I think I need some help
Thanks
ph
--
http://perso.orange.fr/zygomaths/index.fr.html
More information about the device-owners
mailing list