2 questions
Peter Trapp
openmoko at genial.ms
Thu Nov 29 14:16:19 CET 2007
Von: Philippe MONROUX <phi2-monroux at wanadoo.fr>
>
> I have flashed (kernel + rootfs (~ 13 min for the rootfs)) one more
> time. And I get the same bad result :
> I can't boot from <<power button only>> nor by <<uboot+boot>> (in this case I
> obtain http://pagesperso-orange.fr/zygomaths/images/IMG_2644.JPG ) .
> I can only boot by <<uboot+Factory reset>>.
>
> So I think I have to <<cu -l /dev/ttyACM0>> (1) or <<minicom>> (2)
>
> (1) The problem is that cu don't work properly. I get
>
> root $> cu -l /dev/ttyACM0
> Connected.
>
> but no cu prompt. And I can't enter the "nand erase clean rootfs or
> kernel" command (I can enter ~ the prompt appear and . to disconnect
> but it is unpredictable and uncertain).
>
That's exactly I had. Yesterday I summarized the stuff and I will post the results on this list this evening...
I will also update the wiki, if I have enough time today.
sorry for the delay
-homyx
--
for Windows problems reboot
for Linux problems be root
More information about the device-owners
mailing list